handbook boiler

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages

handbook boiler have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

handbook boiler.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
handbook boiler handbook boiler handbook boiler

Degremont - Water Treatment Handbook - Lennte

Degremont - book on water treatment recommended by Lenntech Water treatment handbook - 1991 sixth edition Degremont ISBN: 2950398413 A useful handbook on water treatment for engineers and students. Volume 1 1.

lexie@zozen.com > Get A Quote >

Boiler Operator Study Guide - Sheffield Ste

Arkansas Department of Labor Boiler Inspection Division Boiler Operator Study Guide 10421 West Markham Little Rock, AR 72205 (501) 682-4513PLEASE NOTE: THE BACK PAGE OF THIS STUDY GUIDE IS YOUR APPLICATION

lexie@zozen.com > Get A Quote >

ボイラ | ()について(

The Hartford Steam Boiler Inspection and Insurance Company でのきは、においわせください。 5.をするためには、どのようながなの?

lexie@zozen.com > Get A Quote >

cfb boiler handbo

cfb boiler handbook – CFBC Boiler cfb boiler handbook – Fire Tube Boiler Dec 6, 2016 – CFB boiler bed material in fluidized bed boilers is the same with the … IFRF Handbook The combustion may take place under atmospheric or

lexie@zozen.com > Get A Quote >

JIS B 8223:2015 ボイラのびボイラ

JIS B 8223 :2015 ボイラのびボイラの Water conditioning for boiler feed water and boiler water このは,1961 にされ,その 6 のをてにっている。のは 2006 に

lexie@zozen.com > Get A Quote >

Steam Engineering Basics - John Forest

Steam Engineering Basics 3 When considering the volume of a pound of steam, consider that a pound of water has a vol-ume of only 0.016 cubic feet. Therefore, even at 200 psia, when water turns into steam, its volume increases by

lexie@zozen.com > Get A Quote >



lexie@zozen.com > Get A Quote >

Heating, Air Conditioning, and Refrigeration Mechanics

2019/04/12 · Occupational Outlook Handbook > Boiler systems are sometimes installed by a boilermaker. Home appliance repairers usually service window air conditioners and household refrigerators. <- Summary Work Environment ->

lexie@zozen.com > Get A Quote >


Steam Systems 6 2. Obtain a composition analysis for each fuel, which will be necessary for calculating fuel usage for a given load. 3. Determine the fuel costs; this is necessary for the economical optimization of boiler room design.

lexie@zozen.com > Get A Quote >

・・ | JSA Group Webde


lexie@zozen.com > Get A Quote >

Cleaver-Brooks - Complete Boiler Room Solutio

BoilerSpec® The Cleaver-Brooks BoilerSpec® (Boiler Book) is the most trusted resource in specifying boiler room equipment. Featuring product specifications, engineering data, and detailed efficiency and emissions tables for our

lexie@zozen.com > Get A Quote >