parameters for fluidized bed boilers

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

parameters for fluidized bed boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


parameters for fluidized bed boilers.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
parameters for fluidized bed boilers parameters for fluidized bed boilers parameters for fluidized bed boilers

Fluidized Bed Boilers | ScienceDire

ABSTRACT An overview of fluidized-bed combustion boilers was based on the verified problems, factors that prompted evolutional changes in fluidized-bed combustion boilers, and classification of fluidized-bed combustion boilers.

lexie@zozen.com > Get A Quote >

MULTIFUEL BUBBLING FLUIDIZED BED BOILERS AN

OUTOTEC BUBBLING FLUIDIZED BED COMBUSTION AND ADVANCED STAGED GASIFICATION Outotec’s proprietary solution for burning various types of fuels is based on four elements, adjusted based on the requirements of

lexie@zozen.com > Get A Quote >

Fluidized Bed Boiler - an overview | ScienceDirect Topi

Fluidized Bed Boiler Fluidized bed boilers are simply one class of fluidized bed reactors such as fluidized bed gasifiers, cokers, catalytic crackers, and metallurgical processing systems. From: Coal-Fired Electricity and Emissions

lexie@zozen.com > Get A Quote >

Why to prefer Fluidized bed combustion boilers ?:-

Fluidized bed combustion (FBC) is a combustion technology, based on a layer of sand or a sand-like media, where the fuel is introduced into and combusted. The combustion air blows through the sand layer from an opening in the

lexie@zozen.com > Get A Quote >

Fluidized Bed Combustors for Biomass Boile

Fluidized-bed boilers are the most common type of boilers recommended for biomass fuel. The fuel is suspended by an upward flow of combustion air through a bed of hot, inert particles, allowing oxygen to reach the combustible

lexie@zozen.com > Get A Quote >

Fluidized Bed Combustion | Fluidized Bed Boiler |FB

Fluidized Bed Combustion is the ignition of a solid fuel under the conditions mentioned above. We, At Thermodyne, Boiler Manufacture in India, We design and manufacture Boilers with Bubbling Fluidized Bed Combustion (BFBC)

lexie@zozen.com > Get A Quote >

Coal Consumption of 20-ton Circulating Fluidized Bed

Coal Consumption of 20-ton Circulating Fluidized Bed Boiler Abstract:The coal consumption, technical parameters of 20 ton CFB boilers and the topics that many users are concerned about when choosing the manufacturer. ZOZEN's

lexie@zozen.com > Get A Quote >

Characteristics of the Internally Circulating Fluidized

CHARACTERISTICS OF THE INTERNALLY CIRCULATING FLUIDIZED BED BOILER T. HIROTA, T. OHSHITA, S. KOSUGI, S. NAGATO, T. HIGO, AND N. INUMARU Plant Engineering Division, Ebara Corporation Tokyo, Japan

lexie@zozen.com > Get A Quote >

Design and Operation of Biomass Circulating

1 DESIGN AND OPERATION OF BIOMASS CIRCULATING FLUIDIZED BED BOILERS WITH HIGH STEAM PARAMETERS Shiyuan Li, Shaolin Bao, Qinggang Lu, Dongyu Wang, Haipeng Teng Institute of Engineering

lexie@zozen.com > Get A Quote >

SHXF Circulating Fluidized Bed Boiler_TAIGUO Boiler

Circulating Fluidized Bed Boiler Circulating fluidized bed boiler is a new kind of promising efficient clean combustion of coal boiler. Our company is a professional manufacturer of circulating fluidized bed boiler and boiler provides

lexie@zozen.com > Get A Quote >

(PDF) Comparative Evaluation of Thermal Design

PDF | The present paper discusses thermal design parameters of different sizes of circulating fluidized bed (CFB) boilers with capacities ranging from 2 MWe pilot scale boiler to a 600 MWe utility boiler. Physical boiler size and shape

lexie@zozen.com > Get A Quote >