furnace feed coal auger

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

furnace feed coal auger have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


furnace feed coal auger.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
furnace feed coal auger furnace feed coal auger furnace feed coal auger

Model 140 Auger - Alaska Company In

Model 140 Auger. Standard Features: 1650 cfm Blower, Fan Limit, Glass View Door, Large Ash Pan, Matte Black Finish, Auto Heat Control Box, Reostat. Options: Thermostat System, Domestic Water Coil, Cold Air Return Box, Barometric Damper (must be installed on power vent and chimney models)

lexie@zozen.com > Get A Quote >

Portage & Main Outdoor Water Furnace Automatic Stoke

the front of the furnace, and is driven by the same motor as the feed auger from the back. Once the trough is bolted on in the front, the ash removal auger is then inserted through the trough with the keyed end sticking out the back of the furnace. A drive shaft is provided that quick attaches to the

lexie@zozen.com > Get A Quote >

Raptor I Automated Coal Stoker Boiler / Hot Water Furna

Raptor I Automated Coal Stoker Boiler / Hot Water Furnace . Raptor I Automated Coal Stoker Boiler / Hot Water Furnace: FOSS-FUEL HEATING IS OUT OF BUSINESS This page is for previous customers convenience. To see the equivalent product we now carry - …

lexie@zozen.com > Get A Quote >

Auger Feed Motor • Alaska Coal Stove Parts • Jonestown,

This is an Auger Feed Motor model 140 for an Alaska Coal Stove. Call Jono Ace Hardware today for you Alaska Coal Stove Parts.

lexie@zozen.com > Get A Quote >

DS STOKER FURNACE – HeatingWor

Stoker Furnace Model #DS SF250 The Stoker Furnace is a twin to the Stoker Boiler that we manufacture. The differenceis “hot air” vs. “hot water”. It is an auger-fed stoker with a pot burner, designed to burn rice coal. It is designed to feed the coal from an optional 500 lb. hopper or coal bin. This unit is constructed

lexie@zozen.com > Get A Quote >

Installation and Operating Manual for the EFM Stoke

feed worms that shortens their life considerably. 3. When securing a supplier for your coal, be sure he is aware of the above conditions and make sure you get clean coal with no foreign materials and a minimal amount of fines. If you are in doubt as to the quality of the coal from your supplier, it is advisable to purchase a small

lexie@zozen.com > Get A Quote >

CA1190803A - Auger-fed sawdust burner with revolvin

A B S T R A C T A furnace for burning particulate fuels, such as sawdust and the like, and which includes a rotating auger mounted in a rotating cylindrical hopper for feeding the saw-dust to a sawdust burner. The hopper is rotatably mounted in a position adjacent a sawdust burner which is located in a housing to form a furnace enclosure.

lexie@zozen.com > Get A Quote >

Auger Replacement (891141) | Wood-Furnaces.n

Turn to Wood-Furnaces.net when it comes to replacement wood furnace parts, in particular this Replacement Auger.The part number is 891141. Fits Units: 5500, 6041, 6500, 6110, 6220, 5500M, 5500XLT, 6041HF, 6041I, 6100, 5510, Breckwell Big E II SP1002, and Breckwell (2012 or …

lexie@zozen.com > Get A Quote >

250 Stoker Forced Air Furnace - messickstove.c

DS has over 30 years of experience with designing and manufacturing solid fuel stoves and boilers. In 2015 DS started the research and development which lead to the Stoker Forced Air Furnace. It is an auger fed stoker with a pot burner, designed to burn rice coal. It is designed to feed the coal from an optional 500 lb. hopper or coal bin.

lexie@zozen.com > Get A Quote >

I am working on a coal auger feed for a Iron Fireman coa

11/22/2011 · I am working on a coal auger feed for a Iron Fireman coal furnace that was purchased in the late 30's or early 40's. The portion of the auger that feeds directly into the furnace is wedged tight and I can not find a way to access the end at the furnace.

lexie@zozen.com > Get A Quote >

Coal Auger - YouTu

12/16/2012 · This coal auger takes the coal from the silo and sweetly dumps it in the back of the coal stoker. No more shoveling coal for the lady of the house!

lexie@zozen.com > Get A Quote >