single phase steam generator

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages

single phase steam generator have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

single phase steam generator.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
single phase steam generator single phase steam generator single phase steam generator

The best steam generators. Perio

The advantage of two steam outlets in the generator and two steam heads with steam shields in your room is to keep the noise level as low as possible. 2 Automatic self cleaning system. 3 Descaling pump for periodic use to > Get A Quote >

3 phase steam generator for steam ro

Amerec Steam Sizing Specify your shower dimensions to help us find a steam generator to best fit your needs. US. Metric. Length Generators can be wired 1 or 3 phase. 240 volts. View More AK Classic Steam Power Generator > Get A Quote >

Steam Generato

Steam Generator (KW) is rated according to the size of the room (cubic meters), and according the power supply available e.g. Single or Three Phase. Steam Generators require the following: 15mm Cold Water Supply. Power > Get A Quote >

What are the Common Generator Problems and It's

What are the Common Generator Problems and It's Protection Date Friday, March 06, 2015 Tags AC Machines Electrical Equipment Electrical Machines Generator what Introduction Generator protection is very important in power > Get A Quote >

Experimental study of single- and two-phase flow field

2019/05/18 · Abstract Laser-Doppler anemometry (LDA) was used to measure local mean axial velocities and turbulence intnsities at selected locations within a study model dimensionally protypic of an existing PWR steam generator > Get A Quote >

Generator, Generator Suppliers and Manufacturers a

Product Details Good quality factory direct price diesel generator set 10kva 10000 watt 3 phase silent diesel generator Dacpower brand Silent/ Super Slent /Open type Air-cooled diesel generator series. Power range from 2kw - 12kw > Get A Quote >

Brewery Steam - Electro-Steam Generator Cor

Electro-Steam delivers a power steam generator in an efficient, affordable, space-saving package. Additional benefits include the following: Reliable automatic heat for your combi/kettle or tank brewing systems Safe, efficient > Get A Quote >

Fundamentals and Advancements in Generato

1 Fundamentals and Advancements in Generator Synchronizing Systems Michael J. Thompson, Schweitzer Engineering Laboratories, Inc. Abstract—Synchronizing a generator to the power system must be done carefully to prevent > Get A Quote >

Steam Generator: Home & Garden | eB

Power: 9KW / 220V, 60HZ. LT-90 steam generator, which has the reasonable design, stable function, use the international advanced technology. The high quality Volt: 220-240V, 50/60Hz, 6KW, 1 Phase. It pass the ISO9001 > Get A Quote >

Steamist Spa A

This online Selection Guide will make it easy to choose the right Steamist components for your in-home steam shower, including the Steam Generator, Total Sense Exterior walls increase potential heat loss and may require a > Get A Quote >

How is three-phase electric power generated? - Quo

Now, let us go back to the question. A three-phase electric power generator basically consists of three single-phase windings, which are named as stators and separated with 120 degrees away in 360 degrees circle of the cross > Get A Quote >