using the following trackback link water tube boilers

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages

using the following trackback link water tube boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

using the following trackback link water tube boilers.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
using the following trackback link water tube boilers using the following trackback link water tube boilers using the following trackback link water tube boilers

The soot and scale problems - Danfoss Heati

release part of their energy to the water at the outside. Fire tube boilers are usually smaller (1 to 25 t/h) and mostly in the 5 to 20 bar range. Soot cleaning is simple, > Get A Quote >

8 According to number of Tubes Single tube Multi tube boiler

The technical details that are used to give information about a particular boiler include the following things Comparison between water-tube and fire tube boilers Water Tube boiler Fire Tube boiler Water is inside the tube and flue gases surrounded to it. > Get A Quote >

Fire-tube boiler - Wikiped

A fire-tube boiler is a type of boiler in which hot gases pass from a fire through one or (many) Fire-tube boilers sometimes have water-tubes as well, to increase the heating surface. A Cornish boiler may have several water-tubes across the diameter of the flue > Get A Quote >

What is Boiler? | Components & Application of Boiler System |

What is Boiler? Learn about backbone components of boiler systems & industrial & residential Applications & Industries that are using boilers. This post will walk you through main parts and working of steam boilers with design explanation of boilers. > Get A Quote >


Key Components of Boilers are:-Burner – The burner is the component of boiler that provides the heat that heats the water of system. The fuels used can be natural gas or oil. > Get A Quote >

(PDF) 4 10 5 Boiler Blowdown | William Manso - Academia.e

High Pressure Water tube boiler with superheater etc. 3,000 - 3,500 ppm 4. Package and economic boilers 3,000 ppm 5. Coil boilers and steam generators 2000 (in the feed water Note: Refer guidelines specified by manufacturer for more > Get A Quote >


2 thereon to provide for and maintain safe operating conditions, but is definitely not the intent that they should prevent the operation of any equipment that can be shown to be reasonably safe. With these considerations in view, the following rules for > Get A Quote >

Engineering And Technology: Sterling Boil

Stirling boilers are one of the larger arrangements for a water-tube boiler: acceptable for stationary use, but impractical for mobile use, except for large ships with modest power requirements. They consist of a large brick-built chamber with a sinuous gas path through > Get A Quote >

Heat transfer study under supercritical pressure conditions for

Heat transfer study under supercritical pressure conditions for single rod test section. / Mori, H.; Yoshida, S.; However, the SCPR conditions are different from those for the SCP fossil boilers in the following three points. 1) The thermal-hydraulic diameter in > Get A Quote >

Efficiency studies of combination tube boilers - ScienceDire

Efficiency studies of combination tube boilers Author links open overlay panel Brundaban Patro Show more https: On the other hand, water tube boilers are more efficient, but they are complicated. Again, they cannot store a large amount of steam. But the > Get A Quote >

What is the difference between a hot water heater and a boile

The following extract taken from an article by Ingo Paul in Energy Issues No 19 April 1999 published by the World Bank [external link] briefly describes the difference between a subcritical and a supercritical boiler. "Supercritical" is a thermodynamic expression > Get A Quote >