wood boiler biomass thermal oil boiler

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

wood boiler biomass thermal oil boiler have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


wood boiler biomass thermal oil boiler.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
wood boiler biomass thermal oil boiler wood boiler biomass thermal oil boiler wood boiler biomass thermal oil boiler

Biomass boiler - china-steamboiler.c

SZL Wood Chip Steam Boiler SZL series product has a double-drum offset hearth (D-type layout), great apply for biomass fuel, environmental protection and energy conservation, and is a key promoted product of national energy-saving projects.

lexie@zozen.com > Get A Quote >

biomass thermal oil boiler | Industrial steam boile

biomass thermal oil boiler Features. Features 1.Biomass boilers can replace oil or gas boilers to heat hot water and radiators (or under floor heating). They burn logs, wood chips, wood pellets or other forms of biomass The advanced biomass boiler provided by Sitong Boiler are fully automatic.

lexie@zozen.com > Get A Quote >

Coal biomass wood fired thermal oil boiler for plywoo

Home – Coal Biomass Boilers – Coal biomass wood fired thermal oil boiler for plywood mill. Quick inquiry: I need the quotation of , the fuel is , the pressure is , this capacity is , My Name is , my Email is , my phone number is , Please Send the detail information for me! Coal biomass wood fired thermal oil boiler for plywood mill

lexie@zozen.com > Get A Quote >

THERMAL OIL | Danstok

Thermal/hot oil plants. The Danstoker hot oil boiler systems are specially designed for the plant in question and are built according to DIN 7454. A hot oil boiler is often used instead of traditional steam and water boilers, with oil as the heat-transferring media, and is selected typically for its ability to achieve a higher temperature at a

lexie@zozen.com > Get A Quote >

500KW Biomass Fired Thermal Oil Boilers | Best hot oi

May 15, 2015 · YGL Biomass Wood Fired Thermal Oil Boilers use wood pellet as fuel, the fluid thermal oil is heated in the tube. Using the circulating pump to force the liquid thermal oil circulation,and then transporting the heat to the thermal equipment. At last, the oil return back the thermal oil heater.

lexie@zozen.com > Get A Quote >

Biomass Fired Thermal Oil Boiler - china-steamboiler.c

YLW Series(0.35-14MW)Organic Heat Carrier coal /wood chip fired thermal oil Boiler. Organic heat carrier furnace is a kind of special boiler model is also called the heat-conducting oil furnace boiler, has the advantages of low pressure, high temperature characteristics, the heatingtemperature can reach 340 ℃ liquid or vapor phase 400 ℃.

lexie@zozen.com > Get A Quote >