model no ddfc 1014 boiler heating surface

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

model no ddfc 1014 boiler heating surface have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


model no ddfc 1014 boiler heating surface.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
model no ddfc 1014 boiler heating surface model no ddfc 1014 boiler heating surface model no ddfc 1014 boiler heating surface

CAST IRON COMMERCIAL WATER OR STEAM BOIL

heating surface for maximum heat extraction Rear Observation Port Includes plugged tapping for over-fire draft readings (not shown) Burner Mounting Plate With flame observation port Removable Side Jacket Panels Easy access

lexie@zozen.com > Get A Quote >

Gas Home Furnaces & Heating Systems for sale | eB

Get the best deal for Gas Home Furnaces & Heating Systems from the largest online selection at eBay.com. Browse your favorite brands affordable prices free shipping on many items. Standard Features Model No

lexie@zozen.com > Get A Quote >

104T Boil

5 HP 3450 RPM 1 Phase Industrial Electric Motor 184T Brand new 5 horsepower heavy duty industrial electric motor model number Same as L1409T, this motor is 230 volt, 23 full load AMPS, 60 Hz, 184T Frame, Single phase, 1-1/8

lexie@zozen.com > Get A Quote >

Heating Surface Area of Fire Tube Boiler - CR4

2012/02/26 · I am currently working on designing of a fire tube boiler. I have to calculate the heating surface area. I ve heard a rule of thumb that 1 sq ft of area is required to produce 7 lbs of steam. I am

lexie@zozen.com > Get A Quote >

SLANT/FIN INTREPID TR SERIES INSTALLATION AN

View and Download Slant/Fin Intrepid TR Series installation and operating instructions manual online. OIL-FIRED WATER AND STEAM BOILERS/NO.2 OIL. Intrepid TR Series Boiler pdf manual download. × × Sign In Upload

lexie@zozen.com > Get A Quote >

COMMERCIAL ATMOSPHERIC GAS-FIRED STEAM

Series 5B SPECIFICATIONS PAGE 4 Series 5B Ratings Boiler Model (1) Input Gross Output Steam USA Boiler H.P. (No.) & Size of Flue Outlets Breeching Diameter (In.) Round Dia. In. x Ft. Rectangular In. x In. x Ft. Approx

lexie@zozen.com > Get A Quote >

through - Water Heaters | Tank & Tankless Water

SUGGESTED SPECIFICATION The gas-fired hot water supply boiler(s) shall be A. O. Smith VF Boiler model VW_____ having an input rating of _____ BTU/hr and capable of supplying no less than _____ GPH at a 100 F

lexie@zozen.com > Get A Quote >

PRODUCT DATA PDRTS-2 - Smith Cast Iron Boile

Heating Surface (Sq. Ft.) Furnace Volume (Cu. Ft.) Water Designed and tested to the A.S.M.E. boiler and pressure vessel code, section IV for maximum allowable working pressure, water 80 PSIG. I B R Ratings

lexie@zozen.com > Get A Quote >

Stelrad LST i Plus P+ Radiator - 800 x 1850 mm | Cit

Bathrooms, Plumbing & Heating Supplies Free Delivery on all orders over £50 ex VAT Free Click & Collect Branches Nationwide Home Product Heating Radiators LST Radiators Double Panel Plus LST Radiators Stelrad LST i

lexie@zozen.com > Get A Quote >

GCR Class 11B - Wikiped

Heating surface 1,260 sq ft (117 m 2) Superheater: • Heating area 22 elements, 178 sq ft (16.5 m 2) Cylinders Two, inside Cylinder size

lexie@zozen.com > Get A Quote >

boiler price list philippin

Range of heating surface [m2]* Net price euro 100-750 kW LOGICA OPTIMUM in the picture is a model 100kW FUEL coal Ko II, Ko, nut coal O I, II, pea coal Gk and fine coal MI. Coal can be substituted by firewoodGet a Quote

lexie@zozen.com > Get A Quote >