factors affecting waste heat recovery feasibility

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

factors affecting waste heat recovery feasibility have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


factors affecting waste heat recovery feasibility.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
factors affecting waste heat recovery feasibility factors affecting waste heat recovery feasibility factors affecting waste heat recovery feasibility

JCM Model Project “Power generation by waste

JCM Model Project “Power generation by waste heat recovery in cement industry” Gen TAKAHASHI Deputy General Manager Global Business Development 3 March 2016 JCM Open Seminar 2 About JFE Engineering Project

lexie@zozen.com > Get A Quote >

Main Factors Affecting the Operating Cost of Distillation

The main factors that affect the operating cost of distillation plant is the volume of the steam in the tower. Having a certain production capacity which means that the amount of D is certain, the size V depends on the reflux ratio. The

lexie@zozen.com > Get A Quote >

Feasibility assessment of refinery waste heat-to-powe

Industrial waste heat is a large potential resource for generation of carbon-free electricity. This study investigates the technical and economic feasibility of converting waste heat from a stream of liquid kerosene which must be cooled

lexie@zozen.com > Get A Quote >

Feasibility of utilizing waste heat in drying of plant

International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, RUET, Rajshahi, Bangladesh. Paper ID: TE-280 Feasibility of utilizing waste heat in drying of plant-based food

lexie@zozen.com > Get A Quote >

(PDF) Waste Heat Recovery Power Generation

There are several factors affecting the feasibility of WHR systems. By characterizing the waste heat sources and heat stream, we are able to evaluate the feasibility of these systems. These factors will allow analysis of the quality

lexie@zozen.com > Get A Quote >

DRAFT PRE-DECISIONAL DRAFT Waste Heat

DRAFT – PRE-DECISIONAL – DRAFT 2 23 1. Introduction to the Technology/System 24 1.1. Introduction to Waste Heat Recovery 25 Waste heat in manufacturing is generated from several industrial systems distributed

lexie@zozen.com > Get A Quote >

MOEJ’s support scheme under the JCM and its

Waste Heat Recovery and Electricity Generation in Flat Glass Production Plant Introduction of High Efficient Old Corrugated Cartons Process at Paper Factory 3.7MW Run- of-river Hydro Power Generation in Sulawesi

lexie@zozen.com > Get A Quote >

Global Waste Heat Recovery System Market 2018-202

2019/04/18 · The Global Waste Heat Recovery System Market Report 2018-2023, By Type-(Steam System, Organic Rankine Cycle Systems, Kalina Cycle Systems), By Applications-(Petroleum Refining, Heavy Metal Production

lexie@zozen.com > Get A Quote >

Overview of Waste Heat Recovery for Power and He

Overview of Waste Heat Recovery for Power and Heat Dave Sjoding Northwest Clean Energy Application Center Washington State University Extension Energy Program Waste Heat Recovery for Power and Heat Workshop Chicago, IL

lexie@zozen.com > Get A Quote >

Twelve factors influencing sustainable recycling of

This thesis, “Twelve factors influencing sustainable recycling of municipal solid waste in developing countries," is hereby approved in partial fulfillment of the requirements for the Degree of MASTER OF SCIENCE IN ENVIRONMENTAL

lexie@zozen.com > Get A Quote >

Waste Heat Recovery Market 2019 | Competitive

“The new report on the global Waste Heat Recovery market provides key insights into the Waste Heat Recovery market. The market report is ideal for customers looking to gain actionable insights into the market which can assist

lexie@zozen.com > Get A Quote >