single station multiple boiler auto control system

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages

single station multiple boiler auto control system have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

single station multiple boiler auto control system.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
single station multiple boiler auto control system single station multiple boiler auto control system single station multiple boiler auto control system

Best Multizone Smart Thermostat – 2019 Reviews and Buying Gui

1. Buy multiple thermostats for your zoned system. This might be the best solution if you don’t want a custom integrated system and don’t mind monitoring multiple thermostats 2. Get a single thermostat with remote sensors and multi zone capabilities > Get A Quote >

Standard Steam Boiler Plant Piping Diagr

Title Standard Steam Boiler Plant Piping Diagram Author Department of Veterans Affairs, Office of Acquisition Logistics and Construction, Office of Construction and Facilities Management, Office of Facilities Planning, Facilities Standards Service Subject Standard > Get A Quote >

Boiler Drum Level Control | Control Not

The design of the boiler drum level control strategy is normally described as single-element, two-element, or three changes in feed flow or steam flow can cause very large deviations in boiler drum level. Single-element drum level control can work well only if > Get A Quote >

Honeywell UK Heating Contro

The official UK site for Honeywell Controls. We are the leading suppliers of domestic heating and combustion controls in the UK with products that include time, temperature, gas > Get A Quote >

The Best Thermostat for Multiple Zones - Smart Home and Energy

Typically, homes with this type of heating system have multiple thermostats, as many as one I have a customer that wants to upgrade there 12 zone radiant heat boiler with indirect waterheater to high efficient boiler system. Also upgrade zones to WiFi > Get A Quote >


INSTRUMENTATION AND CONTROL FOR BOILER PLANT SPEC WRITER NOTES: 1.Delete between // // if not applicable to project. Controller: Controllers for two and three element systems shall include: manual/auto control station and indicators showing > Get A Quote >


The boiler drum level control with DCS in thermal power station, with some modification is boiler–turbine system control is to meet the load demand of electric power while maintaining the pressure and water level in the drum within tolerances. The advanced > Get A Quote >

Zone Control | Grundf

Dosing Skid System (DSS) Dosing Tank Station (DTS) Zone Control SA-SPM6 Control Box SE-SL SRG SMD, SMG and SFG ALPHA1 ALPHA2 SQ Magnetic Filters PACOpaQ ALPHA1 Grundfos Packaged Pumping Systems Grundfos Packaged Heat Transfer > Get A Quote >

Feed water and steam system components - Energiteknik | K

Helsinki University of Technology Department of Mechanical Engineering Energy Engineering and Environmental Protection Publications Steam Boiler Technology eBook Espoo 2002 Feedwater and Steam System Components Sebastian Teir, Antto Kulla Helsinki > Get A Quote >

7 Steam Power Plants - Welcome To Mechanical Engineering

This brief overview on steam power plants focuses on conventional pulverized coal fired power plants (PCF PP). ! flue gas desulfurization system ! particulate control system ! ash handling system Figure 1. Steam power plant (Sources: > Get A Quote >

FAQ Sheet - New Build Inspectio

FAQ Sheet Minimum Standard of control •Timer for heating and hot water with independent times •A room thermostat for the living zone •Every time ‘significant works’ are carried out on a controlled service (i.e. the heating system) •Simple boiler servicing is > Get A Quote >