high pressure boiler water parameters above 150 kg cm2

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

high pressure boiler water parameters above 150 kg cm2 have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


high pressure boiler water parameters above 150 kg cm2.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
high pressure boiler water parameters above 150 kg cm2 high pressure boiler water parameters above 150 kg cm2 high pressure boiler water parameters above 150 kg cm2

POWER PLANT CHEMISTRY - SlideSha

Dissolved oxygen in stator cooling water is generally removed by purging with nitrogen gas of high purity (99.99%, min.). Removal of dissolved oxygen depends on the nitrogen pressure which is normally maintained at 0.2 kg/cm2 with alarm for nitrogen pressure in primary water tank set at 0.4 kg/cm2 for better efficiency. 34.

lexie@zozen.com > Get A Quote >

EXCERPTS FROM: ASME BOILER AND PRESSURE VESSEL COD

Chapter SPS 341 APPENDIX A EXCERPTS FROM: ASME BOILER AND PRESSURE VESSEL CODE SECTION I − POWER BOILERS 2010 EDITION INTRODUCTION This Code covers rules for construction of power boilers1, electric boilers2, miniature boilers3, high−temperature water boilers4, heat recovery steam generators5, and certain fired pres-

lexie@zozen.com > Get A Quote >

Nozzles and Turbines Interview Questions and Answers pd

187. A super critical boiler is one that operates above the pressure and temperature of following values (a) 100 kg/cm2 and 540°C (b) 1 kg/cm2 and 100°C (c) 218 kg/cm2 abs and 373°C (d) 218 kg/cm2 abs and 540°C (e) 100 kg/cm2 abs and 373°C Ans: c 188.

lexie@zozen.com > Get A Quote >

200 TOP Steam Boilers, Engines, Nozzles and Turbine

8/31/2014 · (e) none of the above. Ans: b 28. Water at pressure of 4 kg/cm2 and 160°C temperature when exposed to atmosphere will (a) boil (b) flash i.e. get converted into steam (c) remain as it was (d) cool down (e) none of the above. Ans: b 29. The dry saturated steam at very high pressure (150-200 kg/cm2) when throttled to atmosphere will become (a) wet

lexie@zozen.com > Get A Quote >

December 2016 | CIVIL ENGINEERING INTERVIEW QUESTION

(e) none of the above. Ans: b 28. Water at pressure of 4 kg/cm2 and 160°C temperature when exposed to atmosphere will (a) boil (b) flash i.e. get converted into steam (c) remain as it was (d) cool down (e) none of the above. Ans: b 29. The dry saturated steam at very high pressure (150-200 kg/cm2) when throttled to atmosphere will become

lexie@zozen.com > Get A Quote >

Steam & Water Analysis System Overview - Forbes Marsha

Kg/Cm2(body) & 420 Kg/Cm2(seat) as per ANSI B 16.34, 1996 at 250C and is applicable above 1800C. Philosophy And Importance Of Monitoring Boiler Parameters Water Chemistry Nuclear cycle measurement CONDENSATE POLISHING PLANT Drum water, High pressure heaters, Low pressure heaters, Condenser, Plant effluent, D.M. plant, Make-up water to D.M

lexie@zozen.com > Get A Quote >

Biogas Fired Boilers at Best Price in Ind

Specifications:Capacity = 500 kg/hr to 35000 kg/hrDesign pressure (SVLOP) = 10.5 / 14 / 17.5 / 21 / 25 kg/cm2 g or higherFuels suitable: Biogas Biogas Fired Boilers offered comes in durable structure finish with choice of horizontal, three-pass, wet-back structure finish. Special features: - High thermal efficiency - High steam dryness fraction

lexie@zozen.com > Get A Quote >

Rice Husk Fired Boiler - Manufacturers, Supplier

working pressure : 150 psi or 10.54 kg per cm2 Brand New Like 6 ton capacity husk fired steam boiler for sale, year 2011, make Industrial Boiler IBL Vapi , ratings 200m2, working pressure 150 psi or 10.54 kg per cm2, Boiler is with complete mouting fittings like feed pumps, id fd fans, dust collector, screw feeder, electric motors, etc.

lexie@zozen.com > Get A Quote >

high pressure boiler water parameters above 150 kg c

high pressure boiler water parameters above 150 kg cm2. If you run into any problems with the boiler, please contact us directly by email [email protected] or fill out the online service request. We will do our best to resolve any problems you might have within 24 hours.

lexie@zozen.com > Get A Quote >

Water Steam - Critical and Triple Point - Engineering ToolB

At the critical point there is no change of state when pressure is increased or if heat is added. At the critical point water and steam can't be distinguished and there is no point referring to water or steam. The critical point of water is achieved at. Water vapor pressure of 217.75 atm = 220.64 bar = …

lexie@zozen.com > Get A Quote >

high pressure boiler water parameters above 150 kg c

high pressure boiler water parameters above 150 kg cm2. ZHONGYUAN Boiler is a manufacturer of Modular Hot Water and Steam Heating systems that are substantially more efficient than traditional large boilers. More details

lexie@zozen.com > Get A Quote >