polytechnik biomass boilers

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages

polytechnik biomass boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

polytechnik biomass boilers.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
polytechnik biomass boilers polytechnik biomass boilers polytechnik biomass boilers

Polytechnik’s high-efficiency, low-emission biomas

11/20/2018 · Austria-based Polytechnik has been hired by Hillerod Forsyning, the district heating company of the city of Hillerod in Denmark, to supply and install a turnkey biomass cogeneration plant. The Danish utility company manages a major district heating system that includes the new 28 MW wood chip-fired cogeneration plant designed for a maximum generator terminal power of 5.2 MWel.

lexie@zozen.com > Get A Quote >


POLYTECHNIK BIOMASS ENERGY Equipment Bioenergy Association of New Zealand 1 March 2014 Service – POLYTECHNIK Combustion Plants Provider- POLYTECHNIK BIOMASS ENERGY LTD, Havelock North. Further Details – Christian Jirkowsky , Managing For examples of …

lexie@zozen.com > Get A Quote >

Viktor Radić - Regional Manager - Polytechnik Biomas

I am passionate about the implementation of forest or wood residue derived biomass in modern heating systems, reducing the carbon footprint, implementing sustainable and profitable solutions with great performance factors. Promoting woody residue and forest biomass in all applications through education, good practice and sound references.

lexie@zozen.com > Get A Quote >

HoSt: Specialist in Bioenergy syste

HoSt is one of the largest suppliers of bioenergy systems in Europe. The expertise of HoSt focuses on the technological development of the processing of biomass and waste streams and the supply of systems for renewable energy from biomass and waste.

lexie@zozen.com > Get A Quote >

polytechnic biomass boilers - insm-abwassermonitor.

Biomass Boilers - The Leading Biomass Boiler Manufacturer . Biomass boilers are fully automatic industrial boiler system which deliver natural biomass or pellets to match the heat demand of the biomass fired boiler. Generally, biomass boilers share the similar structure with coal fired boilers and behave like coal or gas boilers.

lexie@zozen.com > Get A Quote >

Global Biomass Boilers Market 2019 | Industry Overvie

5/30/2019 · The Biomass Boilers report is composed of those truths and attributes of this market concerning Biomass Boilers revenue, volume, earnings, and its growth speed. This Biomass Boilers research is a key element which is used to get the required statistics from many countries of the world.

lexie@zozen.com > Get A Quote >

Polytechnik Boiler | Gerbera Growers | :: K&L Nurseri

Polytechnik Boiler Biomass Boiler project "Super storms, super typhoons, super nor westers ,super weather events are happening around the world with some regularity, not to mention the odd earthquake here and there just to add to the mix” says Ian Kempthorne of K&L Nurseries, Canterbury New Zealand.

lexie@zozen.com > Get A Quote >

Biomass Energy - rsm.

installations, POLYTECHNIK is able to provide its costumers with state-of-the-art technology for the utilisation of biomass for energy generation. POLYTECHNIK engineers, supplies and installs biomass fired boilers with a thermal output ranging from 300 kW to 30,000 kW (single unit output).

lexie@zozen.com > Get A Quote >

Polytechnik Biomass Energy | Linked

Erfahren Sie mehr darüber, wie es ist, bei Polytechnik Biomass Energy zu arbeiten. Melden Sie sich noch heute bei LinkedIn an – völlig kostenlos. Entdecken Sie, wen Sie bei Polytechnik Biomass Energy kennen, nutzen Sie Ihr berufliches Netzwerk und finden Sie in diesem Unternehmen eine Stelle.

lexie@zozen.com > Get A Quote >

Polytechnik Biomass replacing coal-fired boilers a

5/29/2019 · Polytechnik Biomass replacing coal-fired boilers at Christchurch hospital Renewable energy for Christchurch hospital. Polytechnik Biomass Energy, based in Austria, has been awarded the contract to design, manufacture and install replacements for the current coal-fired boilers. The total budget for the project is approximately $45 million.

lexie@zozen.com > Get A Quote >

Polytechnik Biomass Energy

Polytechnik engineers, supplies and installs biomass-fuelled boilers with a thermal output ranging from 300kW to 30,000 kW (single unit output). For power production, steam and ORC turbines with a standard electrical output from 100 kW to 20,000 kW per turbine generator are available.

lexie@zozen.com > Get A Quote >