low pressure and steam output boiler

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

low pressure and steam output boiler have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


low pressure and steam output boiler.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
low pressure and steam output boiler low pressure and steam output boiler low pressure and steam output boiler

Steam Boilers - Exam 1 Flashcards | Quizl

Steam Boilers - Exam 1. STUDY. PLAY. A low pressure steam boiler has an MAWP of ___ pounds per square inch. 15. The higher the steam pressure, the higher the ___ of the water in the boiler. Boiling Point A high pressure steam boiler operates at a steam pressure over___ 15 p.s.i.

lexie@zozen.com > Get A Quote >

Why you can't use high-pressure steam boilers on lo

Jun 23, 2014 · This is why you can't run a high-pressure boiler on low-pressure settings. The boiler manufacturer told the contractor about this when the contractor called to ask. The contractor thought he could get around the high-velocity problem by cutting into the boiler …

lexie@zozen.com > Get A Quote >

Sufficient Steam Output Industrial Gas Boiler Runnning A

Sufficient Steam Output Gas Steam Boiler Runnning At Low Pressure . Product description . 1. Adopt domestic and foreign advanced large furnace design Increase the diameter of furnace on the basis of original traditional design.expand the surface of radiant heat exchange.

lexie@zozen.com > Get A Quote >

Boiler Capacity - Engineering ToolB

Boiler Capacity Steam boilers output can be expressed in Boiler Horsepower, MBTU or in Pounds of Steam delivered per hour . Sponsored Links . Boiler load - the capacity of a steam boiler - is often rated as boiler horse powers, lbs of steam delivered per hour, or BTU. boiler capacity power pressure btu mbtu pounds steam hour boilers output

lexie@zozen.com > Get A Quote >

low pressure pressure and steam output boiler – Industria

These low pressure boilers are used for speeding up the curing or … Low-pressure Steam System Start-up and … 26 RSES Journal SEPTEMBER 2010 w w w . r s e s j o u r n a l . c o m Low-pressure steam controls A well-designed boiler and steam-delivery system must be Boiler Pressure Relief Valve Leaking — too much pressure …

lexie@zozen.com > Get A Quote >

Safety Valves in Low Pressure Steam Syste

Safety Valves in Low Pressure Steam Systems Sizing safety valves after boiler output power in low pressure systems (kW and Btu/hr) Sponsored Links . The main purpose of a safety valve is to prevent the pressure in a system to exceed the certification pressure. Above certification pressure, no one can guaranty the systems safety - and especially

lexie@zozen.com > Get A Quote >

Difference Between Low- and High-Pressure Boilers | Hunk

A boiler is an appliance designed to heat water and produce energy. The heat is applied to water in an enclosed container before being distributed throughout the system. The major difference between a low-pressure and a high-pressure boiler is the amount of pressure per square inch and pounds per square inch gauge that the boiler produces.

lexie@zozen.com > Get A Quote >

4 things to look out for in steam boiler pressure control

Sep 28, 2016 · The boiler pressure gauge read 12 psi. The boiler operating pressure control was set for 15 psi. Steam was spewing from the boiler feed vent like an old locomotive. I adjusted the operating pressure control to the normal steam pressure. Within a short time, the boiler operated the way it was supposed to and the building had heat.

lexie@zozen.com > Get A Quote >

Steam Accumulators and Steam Boiler Response to Load

excess of the boiler’s maximum output. The cold metal in the steam-using equipment can transfer energy from the steam source nearly as fast as steam can be supplied to the equipment. Consequently, a boiler will rapidly depressurize. A rapidly depressurized boiler can suffer poor steam quality and nuisance low-water shutdowns.

lexie@zozen.com > Get A Quote >

15 PSI Low Pressure Steam Boilers Atmospheric / Natura

15 PSI Low Pressure Steam Boilers Atmospheric / Natural Gas Fired PRODUCT DESCRIPTION Rite atmospheric gas fired low pressure steam boilers are the boiler of choice for breweries, bakeries, distilleries and building heat throughout North America. Some of our most important features include: A broad range of sizes - from 3 to 300 horsepower.

lexie@zozen.com > Get A Quote >

industry low pressure pressure and steam output boil

industry low pressure pressure and steam output boiler. Boiler Type. ZOZEN boiler covers an area of 150 thousand square meters, with an annual production capacity of 2000 industrial boilers and 25000 tons of steam.Our products have been sold to more than 100 countries and regions and set up offices in many countries to ensure that they serve

lexie@zozen.com > Get A Quote >