flexible steam generator cover

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

flexible steam generator cover have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


flexible steam generator cover.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
flexible steam generator cover flexible steam generator cover flexible steam generator cover

Braided Flexible Connectors - Flexicraft Industri

Braided flexible connectors for piping equipment are an important part of a wide range of systems that require flexibility in fluid transfer. They are constructed from lengths of corrugated stainless steel braided metal hose to create the flexible pipe couplings. Flexicraft makes quality metal hose in any length or fitting, up to 24" diameters.

lexie@zozen.com > Get A Quote >

Figure 1 - Steam Generat

After the walls are complete, the Steam Generator and Control can be wired. 3. Steam Generator Electrical Installation WARNING: All power to the Steam Generator must be turned off. a) Remove the two screws holding the electrical access cover and remove cover. b) Locate the supply line knockout. Mount proper strain relief into knockout hole.

lexie@zozen.com > Get A Quote >

Portable steam weed killing apparatus - SIMPSON; STEPH

2/29/2000 · The steam 92 is then directed by pressure deferential through the steam conduit 36 and into the super-steam generator 40. The super-heated steam 93 then flows through the flexible hose 50 to the weed cover 60. Steam 92 is then delivered to the weed cover 60 for one to eight seconds depending on the size and type of plant.

lexie@zozen.com > Get A Quote >

Figure 1 - Steam Generat

Steam Generator. 90°C copper wire is required for generator connection. b) Dedicated overcurrent protection device, such as an cover and remove cover. b) Locate the supply line knockout. Mount proper Route flexible conduit from valve to knockout and …

lexie@zozen.com > Get A Quote >

Leifheit - Ironi

Ironing has never been so easy Maximum ironing comfort for perfect laundry. Filter Ironing All Steam ironing Ironing boards Ironing board covers Accessory Our steam ironing stations and our height-adjustable ironing boards make ergonomic ironing and an excellent ironing result possible. Whisks, salad spinners, storage boxes, measuring cups

lexie@zozen.com > Get A Quote >

Steam Room Design Considerations - Certik

Steam Room Design Considerations When planning a steam room project the objectives of comfort and relaxation should be kept in mind. A room properly designed and constructed should maintain a temperature range of 115º to 120º F (46º to 49ºC), heat to this temperature in 15 to 20 minutes and have a comfortable and relaxing seating arrangement.

lexie@zozen.com > Get A Quote >

Steam turbines | Power Generation | Energy Technolog

Siemens Steam Turbines are an essential piece of turbomachinery to many power plants worldwide. They are applied either as a generator drive or a mechanical drive for pumps and compressors. The modular design concept of all steam turbines ensures high flexibility, availability and a …

lexie@zozen.com > Get A Quote >

Iron Flex | eB

1mm 10 amp non kink iron flex. Ideal for all steam and dry irons. 3 Core flex, Live, Neutral and Earth. to see our range of Sockets and Extension leads. Image is for display purposes only.Item may var

lexie@zozen.com > Get A Quote >

SST-200 - assets.new.siemens.c

The SST-200 is a single casing steam turbine provided in a packaged, skid-mounted configuration. It represents a solution based on long experience with both mechanical and generator drives and is characterized by ease of installation, facilitated by the modular package. The tailor-made, flexible steam turbine exactly fits to the customer needs.

lexie@zozen.com > Get A Quote >

Novaflex® Industrial Hose - Novafl

Novaflex® Industrial Hose. Complete line of air, chemical, petroleum, food grade, material handling and mining hoses, steam and water hoses, expansion joints and connectors. Available with custom end configurations from built-i

lexie@zozen.com > Get A Quote >

Flexible Water Tube Boilers from Bryan Boilers Hig

Bryan Boilers from Bryan Steam include the latest flexible water tube boilers, high efficiency boilers and boiler accessory equipment.

lexie@zozen.com > Get A Quote >