parameters of boiler 135 mw

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

parameters of boiler 135 mw have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


parameters of boiler 135 mw.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
parameters of boiler 135 mw parameters of boiler 135 mw parameters of boiler 135 mw

Design and operation of 350MW CFB boiler in Chi

Exhaust flue gas temperature ℃ 130-135 SO2 (dry,6%O 2) 3mg/Nm 192 NOx (dry,6%O 2) mg/Nm3 112 The advantages of CFB boiler with supercritical parameters smooth tube . 350MW CFB boiler Boiler company Order Operation Boiler was designed and manufactured by Dongfang boiler Load MW 349 Fuel Gangue Main steam temperature ℃ 568

lexie@zozen.com > Get A Quote >

INVESTIGATIONS ON ASH AGGLOMERATION IN CFBC

Data related to Geometry and running parameters is collected from industries who are using CFBC boiler for power generation like HEG Mandideep with capacity of 32 MW (16 x 2 = 32 MW), BLA Thermal Power Plant Gadarwara having capacity of 135 MW (45 x 3 = 135 MW),

lexie@zozen.com > Get A Quote >

50 MWe CFB

SBWL /SEC—The Leader Of China Power Industry SEC/SBWL CFB Boiler Experience Contents 8SEC/SBWL CFB technology development history and experience 850MWe experience & 234T/H CFB project plains 8 Technical characteristics 1、Development of CFB Technology h70′s-80′s 20th Develop BFB by ourselves,main products--35t/h & 220t/h coal gangue fired boiler h90′s 20th Cooperative …

lexie@zozen.com > Get A Quote >

State of the art CFB technology for flexible large scal

biomass), and the lignite fired Kladno (135 MWe) power plant in Czech and lignite fired Kolin Soma plant (2x225MWe) in Turkey. The scale-up of CFB technology with super-critical steam parameters of up to 800 MW e is now The boiler material requirements for most …

lexie@zozen.com > Get A Quote >

7 Steam Power Plants - Dalhousie Universi

This brief overview on steam power plants focuses on conventional pulverized coal fired power plants Efficiency is a function of a number of parameters, such as the boiler design, operating and maintenance 135°C (275°F) is sufficient for the safe operation of pulverized coal fired boilers.

lexie@zozen.com > Get A Quote >

Design and operation of 600MW CFB boiler in Chi

Features of heat flux in CFB • 50% lower than that of the PC boiler, the highest mainly in the taped section covered with anti erosion layer • The flow rate can be lower as 500 -700 kg/m 2-s, much lower than that of PC boiler of >1000 kg/m 2-s • Lower flow rate has the feature of nature circulation for Benson straight tube, i.e. flow rate increases with

lexie@zozen.com > Get A Quote >

SZL Steam Boiler Product Range Offerin

SZL Steam Boiler Product Range Offerings Rated Steam Pressure (MPa) 1.25 1.6 2.5 Rated Steam Capacity [t/h] 6 8 10 15 20 Other capacities and pressures can be supplied on demand

lexie@zozen.com > Get A Quote >

RAFAKO’s proecological investments – boilers and biomas

Introduction RAFAKO S.A. offers, design works, manufacturing and delivery of boilers for combustion of wood and agricultural biomass. • Conditions for the new plant arise from the …

lexie@zozen.com > Get A Quote >

CO27: DEVELOPMENT OF AN EFFICIENT SLOP FIRED

S ISGEC Heavy Engineering Ltd, Noida, India At : 29th ISSCT, Chiang Mai , Thailand, 7 Dec 2016 DEVELOPMENT OF AN EFFICIENT SLOP FIRED BOILER Speaker

lexie@zozen.com > Get A Quote >

BHEL JOURNAL - Bharat Heavy Electricals Lt

BHEL JOURNAL, September 2006 4 rate can be reduced by 8% compared with the heat rate of today's standard power stations featuring steam parameters of 540°C/180 bar and single reheat. This improvement in thermal efficiency helps considerably to conserve fuel resources and reduce CO 2 emission by 20%. This is a substantial

lexie@zozen.com > Get A Quote >

88 Th Steam Boilers - capoberta.

For Sale: 120 t/h (88 MWth) fluidized bed biomass boiler. Heat output 88 MW th Steam parameters 120 t/h, 90 bar (129 t/h, 115 bar), 525 C Boiler efficiency 88.5 % Feed water temperature 135-190 C Flue gas exit temperature 153 C Boiler efficiency 88.5 MW SO 2 Emissions < 395 mg/Nm . Get A Quote

lexie@zozen.com > Get A Quote >