Industrial Autoclave for Silicate Brick

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages

Industrial Autoclave for Silicate Brick have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

Industrial Autoclave for Silicate Brick.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
Industrial Autoclave for Silicate Brick Industrial Autoclave for Silicate Brick Industrial Autoclave for Silicate Brick

AUTOCLAVE CURING - marineprohelp.c

Steam curing of concrete products, sand-lime brick, asbestos cement products, hydrous calcium silicate insulation products, or cement in an autoclave at maximum ambient temperatures generally between 340 and 420 F (170 and 215 C). > Get A Quote >

Brick - IP

Industrial era . Production of bricks set bricks are not fired but may have the curing process accelerated by the application of heat and pressure in an autoclave. Calcium-silicate bricks . and meet the criteria set forth in ASTM C73 – 10 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick). Concrete bricks . > Get A Quote >

Biomass Fired Boiler For Sodium Silicate Plant In Pakist

AAC Plant,AAC autoclave manufacturer,Autoclaved aerated . Industrial autoclave autoclave for sand lime brick Min. Order: 1 set FOB Price: US $ 1000-99999/set Industrial gas fired boiler Biomass boiler Coal fired boiler Production line AAC production line equipment in Russia green calcium silicate board production line . Free Chat > Get A Quote >

silicate block production line – Industrial Boil

calcium silicate brick manufacturer/supplier, China calcium silicate brick manufacturer & factory list, find qualified Chinese calcium silicate brick manufacturers, suppliers, factories, exporters & wholesalers quickly on AAC block production line-Changzhou Hongjia Chemical … Calcium Silicate Board Production Line. … > Get A Quote >

Calcium silicate board Autoclave,calcium silicate boar

Industrial autoclave manufacturer. We are leading manufacturer of calcium silicate board Autoclave for reclaim is fabricated from best Quality of thickness depending upon the capacity and clients choice. External heating arrangement is provided which can be used both for steam and thermic fluid. > Get A Quote >

Bricks - The ABCs of Green Building Materials - Gree

9/1/2016 · • Calcium Silicate Brick — Rather than clay, calcium silicate brick is made with lime, sand, silicate material, and a mineral colorant. This type of brick is called “chemically set,” as opposed to fired. They are typically cured in an autoclave to speed up the chemical hardening process. > Get A Quote >

(PDF) Lime based steam autoclaved fly ash bric

Lime based steam autoclaved fly ash bricks. (SO4)3 (OH)12 25(H2O)) and Calcium Silicate Hydrate (2CaO.SiO2.4H2O) were identified as the binding phases in the real size brick samples after 2 > Get A Quote >

Autoclaving - an overview | ScienceDirect Topi

Dr. Salah M. El-Haggar PE, PhD, in Sustainable Industrial Design and Waste Management, 2007. 9.4 Disinfection of Clinical Wastes. Autoclave (steam sterilization During curing some of the lime reacts with the siliceous aggregate to form calcium silicate hydrate, which binds the brick together. > Get A Quote >

Carbon Fiber Industrial Autoclave - alibaba.c

The autoclave is a widely uesed large volume and heavy weight pressure vessel. It is the main equipment of manufacturing lime sand brick and other silicate building products, at the same time, it is also widely used in rubber vulcanization, heavy metal smelting, refractory brick, autoclaved immersion carburizing compound glass, wood drying and preservative treatment, chemical fiber product > Get A Quote >

industrial Boiler---Changzhou Hongjia Chemical Industry C

Changzhou Hongjia Chemical Industry Co.,Ltd is a professional supplier for technologies and equipments of building material based on autoclaved steam curing, which is a branch under Changzhou Machinery and Equipment Imp. & Exp. Co ., Ltd..Our main products include equipments for all kinds of building materials based on the sand, lime, cement & gypsum, and chemical products. > Get A Quote >

Autoclave aerated brick - BT (China Manufacture

The autoclave is also called steam-rest tank, is a large, heavy and large pressure vessel. Autoclave use is very extensive, used in a large number of aerated concrete block concrete, sand-lime brick, fly ash brick, microporous calcium silicate board, insulation asbestos plate, high strength gypsum building materials such as the steam pressure curing. > Get A Quote >