operation of boiler

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

operation of boiler have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


operation of boiler.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
operation of boiler operation of boiler operation of boiler

Basic Parts of a Boiler | Hunk

A boiler is a self-contained combustion system that heats water. The hot water or steam produced by a boiler is then used in heating systems. Although designs vary, a boiler has four main parts: the burner, the combustion chamber, the heat exchanger and the pluming apparatus.

lexie@zozen.com > Get A Quote >

Boiler Operation Made Easy : Procedure for Starting an

A boiler is one of those machineries that gets the ship going. A boiler is something, which though not required continuously in operating a ship, cannot be done away with. Moreover, it’s a dangerous equipment which generates steam at extremely high pressure, and it is for this reason that proper

lexie@zozen.com > Get A Quote >

Boiler, How it works ? - YouTu

Apr 29, 2016 · Here working and construction details of water tube boiler is explained. Different parts of boiler such as economizer, super heater, re heater, water wall and steam drum are illustrated here.

lexie@zozen.com > Get A Quote >

Heating Boiler Operator's Manual: Maintenance, Operatio

Abstract: Both a valuable on-the-job tool and a licensing exam study guide, the Heating Boiler Operator's Manual offers boiler professionals a clear, straightforward account of cutting-edge methods for the operation, maintenance, and repair of today's heating boilers. This essential reference provides everything needed to keep boilers used for

lexie@zozen.com > Get A Quote >

OPERATIONS AND MAINTENANCE MANUAL -

engineer. Proper boiler venting is critical for operation of your boiler. The flue must be as large or larger than the diameter of the collar opening. Actual sized depends on total distance of flue. It is important to keep the vent pressure at a negative and it is even more important that the pressure is no more negative than -0.05” wc.

lexie@zozen.com > Get A Quote >

Boiler - Wikiped

Boilers generally have 2 or 3 pressuretrols: a manual-reset pressuretrol, which functions as a safety by setting the upper limit of steam pressure, the operating pressuretrol, which controls when the boiler fires to maintain pressure, and for boilers equipped with a modulating burner, a modulating pressuretrol which controls the amount of fire.

lexie@zozen.com > Get A Quote >

PD769 - Boiler Operation and Maintenance - AS

Boiler operation is complicated, especially for modern boilers that are fully automatic. Safety, efficiency, and constant generation of steam or hot water depend on the smooth operation of the boiler. Moreover, some jurisdictions have laws and rules on the boiler operation and boiler operators.

lexie@zozen.com > Get A Quote >

Working Principle | Boilers Gui

The boiler system comprises of: a feed water system, steam system and fuel system. The feed water system provides water to the boiler and regulates it automatically to meet the steam demand. Various valves provide access for maintenance and repair. The steam system collects and controls the steam produced in the boiler. Steam is directed through a piping system to the point of use.

lexie@zozen.com > Get A Quote >