Product thermal capacity: 4-35 t/h
Working pressure: 1.0-2.5 MPA
Outlet temperature: 184-350 ℃
Available fuel: natural gas, coke oven gas, bio-gas，liquid propane gas, diesel, heavy oil, light oil, crude oil
Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries
position of boiler component in steam power plant have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.
position of boiler component in steam power plant.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).
Aug 09, 2016 · In this article we will study about the construction,working, efficiency, advantages and disadvantages of steam power plant. Steam Power Plant. It is the power plant which is used to generate electricity by the use steam turbine. The major components of this power plant are boiler, steam turbine, condenser and water feed email@example.com > Get A Quote >
boiler, condenser, generator, main component, power plant, steam, turbine Main Component on Steam Power Plant Steam power plant is a thermal power plant consists of main components and auxiliary components as well as other firstname.lastname@example.org > Get A Quote >
The superheated steam then finally goes to the turbine.Final Superheater temperatures are in the Range of 540 to 570 °C for large power plants and SuperHeated steam pressures are around 175 bar. Reheater . Steam from the exhaust of the first stage turbine goes back to the boiler for reheating and is returned to the second email@example.com > Get A Quote >
The specified operating pressure is the maximum operating pressure at the turbine throttle valve inlet plus the main steam line pressure drop (between the superheater outlet and turbine throttle valve inlet at the maximum continuous rating of the boiler) rounded to the next higher unit of 5 psi (34 kPa gage).firstname.lastname@example.org > Get A Quote >
Jun 08, 2018 · A boiler is a pressure vessel which is used to generate a high-pressure steam at a saturated temperature. At this high pressure and temperature generally, bi-drum water tube boilers are used. Thermodyne Engineering Systems manufactures water tube boilers of various sizes and capacities that can run on various email@example.com > Get A Quote >