boiler conical head as per asme code

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

boiler conical head as per asme code have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


boiler conical head as per asme code.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
boiler conical head as per asme code boiler conical head as per asme code boiler conical head as per asme code

Design of Pressure Vessel and Prediction of Failure

designing of pressure vessel as per the ASME section VIII, division 1 for given design conditions for various parameters. Validation is done on PV-ELLITE software for the same. Design model prepared in CREO 3 using oc and on2

lexie@zozen.com > Get A Quote >

PPT – ASME SECT. VIII DIV-I CODES, STANDARD

CONICAL HEAD 5. TORICONICAL HEAD 6. BOLTED BLIND FLANGE DESIGN OF ELLIPTICAL HEAD UNDER INTERNAL PRESSURE AS PER ASME SEC-VIII DIV-1, CL. UG-32. FOR EXTERNAL DESIGN PRESSURE 29 30

lexie@zozen.com > Get A Quote >

Design Calculati

0 Computer program verification incl. evidence of alternate calculation per method applied 1 Drawing + Calculation a) Drawing No. and Revision b) ASME Code Edition and Addenda c) Code Cases d) Units: SI/U.S. Customary e) Design- operational data

lexie@zozen.com > Get A Quote >

SECTION VI

SECTION VIII Rules for Construction of Pressure Vessels ASME BPVC.VIII.1-2017 Division 1 2017ASME Boiler and Pressure Vessel Code An International Code Markings such as “ASME,” “ASME Standard,” or any other marking

lexie@zozen.com > Get A Quote >

Comparison of pressure vessel codes - COA

COMPARISON of the various pressure vessel codes These are the codes we are going to compare: • ASME Section VIII, Division 1 • ASME Section VIII, Division 2 • PD 5500 • EN 13445 Part 3 But first we look at the most

lexie@zozen.com > Get A Quote >

Guidebook for the Design of ASME Section VIII Pressur

Click here to view & purchase the PDF eBook version on The ASME Digital Collection.By James R. Farr & Maan H. JawadThis is a fully revised and updated fourth edition of a classic guidebook. It covers the current requirements of

lexie@zozen.com > Get A Quote >

ASME - ASME Internation

ASME International ASME is a not-for-profit membership organization that enables collaboration, knowledge sharing, career enrichment, and skills development across all engineering disciplines, toward a goal of helping the global

lexie@zozen.com > Get A Quote >

PST0179 ASME VIII - Div 1 & 2 Pressure Vessel 20

Quality Assurance System as per ASME codes Materials for pressure parts Materials for non-pressure parts Requirement of low temperature service Deciding impact test requirement Impact test exemptions Impact test Weld fit

lexie@zozen.com > Get A Quote >

Comparison of Cone-to-Cylinder Junction Reinforcemen

Bardia KL, LaBounty DG, Breig T. Comparison of Cone-to-Cylinder Junction Reinforcement Requirements Between ASME Section VIII, Division 1 and Code Case 2286-1. ASME. Pressure Vessels and Piping Conference, Volume 3

lexie@zozen.com > Get A Quote >

EXCERPTS FROM: ASME BOILER AND PRESSUR

Chapter SPS 341 APPENDIX A EXCERPTS FROM: ASME BOILER AND PRESSURE VESSEL CODE SECTION I − POWER BOILERS 2010 EDITION INTRODUCTION This Code covers rules for construction of power boilers1, 23

lexie@zozen.com > Get A Quote >

Pressure Vessels: The ASME Code Simplified, Eighth

Pressure Vessels: The ASME Code Simplified, Eighth Edition by: J. Phillip Ellenberger Abstract: Pressure vessels are found everywhere from basement boilers to gasoline tankers and their usefulness is surpassed only by the

lexie@zozen.com > Get A Quote >