New design power plant boiler drawing

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages

New design power plant boiler drawing have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

New design power plant boiler drawing.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
New design power plant boiler drawing New design power plant boiler drawing New design power plant boiler drawing

Thermal Power Plants - Fuji Electric Glob

fledged coal-fired thermal power plant. The design has cleared the preliminary safety protocols com-mon to both Europe and North America, and is a model of the power > Get A Quote >


Standard Design Criteria/Guidelines for Balance of Plant of Thermal Power Project 2 x (500MW or above) Section- 1 (General) 1-3 Annexure-1 List of participants during the meetings from 19 th July,2010 to 26 July, 2010 held at CEA, New Delhi CEA 1. Sh. > Get A Quote >

Boiler design - Wikiped

Boiler design is the process of designing boilers used for various purposes. The main function of a boiler is to heat water to generate steam. Steam produced in a boiler can be used for a variety of purposes including space heating, sterilisation, drying, humidification and power generation. The temperature or condition of steam > Get A Quote >

Boiler Drawings - IPT Publishing and Training Lt

Authors / New Book Ideas Shopping Cart My Account Boiler Drawings SECTION SEVEN - BOILER DRAWINGS Basic Boiler Design 222 Burners 227,228 Firetube Boilers 222 Draft Fans 227,228 Watertube Boilers 222-224 Downcomers 227,228 224,225 > Get A Quote >

Basic Layout and Working of a Thermal Power Plant |

Coal: In a coal based thermal power plant, coal is transported from coal mines to the generating station. A practical thermal plant possess more complicated design and multiple stages of turbine such as High Pressure Turbine (HPT), Intermediate Pressure > Get A Quote >

Piping Detailed Engineering for 105MW Power Pla

Piping Detailed Engineering for 108MW Power Plant. The project involved equipment modeling of Diesel Engine, Generator and other devices. It also required complete structural modeling of the pipe rack,pipe trench, unloading station and loading bay etc. > Get A Quote >

Boiler Feed Pump (BFP)

In a thermal power plant, the boiler feed pump (BFP) is one of the critical auxiliary machines that are equivalent to the heart against the design pressure (maximum allowable working pressure). The outer barrel is a simple thick cylinder that is not affected by > Get A Quote >

Design and Operation of a Suspension Fired Industrial Solid

FIRED INDUSTRIAL SOLID WASTE DISPOSAL SYSTEM FOR KODAK PARK ROBERT L. MERLE, P.E. MELVIN C. YOUNG GLEN R. LOVE Eastman Kodak INTRODUCTION Kodak Park is an industrial complex in Rochester, New York where the center of > Get A Quote >

Boiler, How it works ? - YouTu

2016/4/29 · A detailed analysis of typical power plant boiler is illustrated in this video with help of animation. 7 STRANGEST New Engines - Duration: 5:38. Tech Planet 4,655,547 views 5:38 All about wells: How a water well is drilled - Duration: 17:22. Engineer775 > Get A Quote >

power plant boiler desi

BOILER DESIGN SOFTWARE for boiler themodynamic s ize (from smaller domestic boiler up to largest boilers found in power plants); d esign (fire tube and water tube) and type (hot water or steam). The software provides assistance in process of designing new > Get A Quote >


Title: 30. PHOTOCOPY OF DRAWING OF POWER PLANT, DETAILS OF ROOF TRUSS, BOILER UNIT - Kennecott Copper Corporation, On Copper River & Northwestern Railroad, Kennicott, Valdez-Cordova Census Area, AK Medium: 8 x 10 in. Reproduction > Get A Quote >