disel boiler for 35 kg to 40 kg steam generation per hour

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages

disel boiler for 35 kg to 40 kg steam generation per hour have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

disel boiler for 35 kg to 40 kg steam generation per hour.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
disel boiler for 35 kg to 40 kg steam generation per hour disel boiler for 35 kg to 40 kg steam generation per hour disel boiler for 35 kg to 40 kg steam generation per hour

How to convert kW to kWh? - RAPID TABL

How to convert kilowatts to kilowatts-hour. How to convert electric power in kilowatts (kW) to energy in kilowatt-hour (kWh).. You can calculate kilowatt-hour from kilowatts and hours, but you can't convert kilowatt to kilowatt-hour, since kilowatt and kilowatt-hour units represent different quantities.

lexie@zozen.com > Get A Quote >

Steam train rescues stranded passengers in Britain wher

12/25/2009 · Train $ 65000 276 kg/person 2 Busses $ 15000 31 kg/person !! and Airplane (half full) 191 kg the capability to build large boilers suitable for steam trains – so I wonder if the boiler for the next one would have to be shipped in from China! 😉 actually be more efficient than an electric train as the last generation of British steam

lexie@zozen.com > Get A Quote >

Free online calculation of diesel generator (genset) powe

Free online calculation of diesel generator (genset) power, energy and fuel consumption Principle of diesel generator (DG) The principle of thermal engine (or diesel engine or genset) electricity generation …

lexie@zozen.com > Get A Quote >

How much coal, natural gas, or petroleum is used t

How much coal, natural gas, or petroleum is used to generate a kilowatthour of electricity? The amount of fuel used to generate electricity depends on the efficiency or heat rate of the generator (or power plant) and the heat content of the fuel. Power plant efficiencies (heat rates) vary by types of generators (prime movers), power plant emission controls, and other factors.

lexie@zozen.com > Get A Quote >

Generators | Generator for Sale | Generators for Hir

ELEGEN is one of South Africa's Largest Privately-Owned Generator Specialists. We have a proven track-record for supplying top-quality generators for sale and hire throughout South Africa and Africa.

lexie@zozen.com > Get A Quote >

Macfarlane Generators Power Calculat

Macfarlane Generators Power Calculator If you require assistance with this Power Calculator or what generator will best suit your requirements, please don't hesitate to contact us. Amperes when kVA is …

lexie@zozen.com > Get A Quote >

Commercial / Industrial Fuels 01-Jan-19 Comparison o

Commercial / Industrial Fuels 01-Jan-19 Comparison of Energy Costs Notes: 1. All prices are inclusive of 13.5% VAT Unit of Average Gross Delivered Percentage Percentage 2. Ex-works price. Add delivery costs as appropriate.

lexie@zozen.com > Get A Quote >

Affordable, Sustainable and Clean Energy Option fo

11/10/2017 · The basic requirement of these industries is in the range of up to 20 MW (electricity) and 30 / 40 ton per hour (thermal) per factory [7]. Till today these industries run on Natural Gas from grid which has been utilized for captive power generation and onsite steam production.

lexie@zozen.com > Get A Quote >

fuel consumption formulas and tables - Barrington Diesel Cl

The aim of turbochargers and aftercoolers are to increase engine efficiency and they do just that. Some of the new turbocharger technologies have resulted in almost unbelievable increases in power output per cylinder of the engine, but this alas, is not a saving in fuel consumption per unit of power produced.

lexie@zozen.com > Get A Quote >

Viscosity of Bunker Oil - Marine Fuel Oil – viscosit

Find viscosity tables and charts for marine fuel oil at multiple temperatures (viscosity and density values with their source).

lexie@zozen.com > Get A Quote >

Generator sizing guide - Electrical and Industrial Powe

Generator sizing guide EATON www.eaton.com Table 4. Fuel pipe sizing Natural gas (values are maximum pipe run in ft) kW Pipe size (in inches) 0.75 1 1.25 1.5 2 2.5 3 7–8 55 200 820 10 20 85 370 800 13–14 10 50 245 545 16–17 40 190 425 20 20 130 305 945 22 15 115 260 799 25 10 95 220 739 27 85 203 552 30 60 147 565 35–36 35 95 370 915 40

lexie@zozen.com > Get A Quote >