power station boilers

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

power station boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


power station boilers.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
power station boilers power station boilers power station boilers

Thermal power station - Wikiped

Boilers in some power stations use processed natural gas as their main fuel. Other power stations may use processed natural gas as auxiliary fuel in the event that their main fuel supply (coal or oil) is interrupted. In such cases, separate gas burners are provided on the boiler furnaces.

lexie@zozen.com > Get A Quote >

Power Plant Boilers: Condenser Performance Monitorin

The steam condenser of a power plant boiler is a critical heat exchanger in the process. Poor performance due to restricted heat transfer can have a dramatic influence on unit efficiency. And

lexie@zozen.com > Get A Quote >

How Power Plant Boiler Works? - brighthubengineering.c

Boiler in a power plant has two functions. The Combustion system converts energy in coal to Heat. Water and steam system converts the heat to steam at high pressures and temperatures. This series explains the working of the boiler in modern power plant.

lexie@zozen.com > Get A Quote >

How Power Plant Boiler Works? How Combustion System i

Boiler in a power plant has two functions. The Combustion system converts energy in coal to Heat. Water and steam system converts the heat to steam at high pressures and temperatures. This series explains the working of the boiler in modern power plant.

lexie@zozen.com > Get A Quote >

Coal Fired Power Plant - YouTu

Aug 11, 2015 · Coal Fired Power Plant . How do you make electricity from coal , Effective Digital Presentations, produced this incredible 3D animation to show how a coal . How a coal power plant …

lexie@zozen.com > Get A Quote >

Steam Power Plant Construction,Working, Advantages an

Aug 09, 2016 · In this article we will study about the construction,working, efficiency, advantages and disadvantages of steam power plant. Steam Power Plant. It is the power plant which is used to generate electricity by the use steam turbine. The major components of this power plant are boiler, steam turbine, condenser and water feed pump.

lexie@zozen.com > Get A Quote >

Understanding Coal Power Plant Heat Rate and Efficien

Fuel, operations, and plant design all affect the overall heat rate and carbon emissions of a power plant boiler. Improving coal efficiency will help financially

lexie@zozen.com > Get A Quote >

Components & Working of Thermal Power Pla

Jun 08, 2018 · Thermal Power Plant. Thermal Power Plants also called Thermal Power Generation Plant or Thermal Power Station.. Definition: “Thermal power plant” as the title infers is the place of mechanism which converts heat energy into electric power. Thermal Power Plant Working Overview. In thermal power plants, the heat energy obtained from combustion of solid fuel (mostly coal) is used to …

lexie@zozen.com > Get A Quote >

power station boiler – Industrial Boil

Aug 02, 2018 · Power station – Wikipedia By heat source. Fossil-fuel power stations may also use a steam turbine generator or in the case of natural gas-fired plants may use a combustion turbine.A coal-fired power station produces heat by burning coal in a steam boiler. Lochinvar Products – Power-Fin Boiler product line.

lexie@zozen.com > Get A Quote >