combustion boiler

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

combustion boiler have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


combustion boiler.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
combustion boiler combustion boiler combustion boiler

Power Boiler Training - Air and Combusti

Fuel and oxygen are required for combustion to occur. To ensure complete combustion of the fuel in the boiler furnace, enough air must be thoroughly mixed with the fuel. Each power boiler fuel requires a different amount of air for complete combustion and the combustion controls must be designed to …

lexie@zozen.com > Get A Quote >

FireStar Combustion Controller | Central Boil

The FireStar Combustion Controller optimizes the gasification process which results in burning 30 to 50% less wood than with traditional methods. The controller also has E-Link technology which allows you to connect your outdoor furnace to the internet where you can monitor it from anywhere in the world.

lexie@zozen.com > Get A Quote >

Combustion | chemical reaction | Britannica.c

Combustion: Combustion, a chemical reaction between substances, usually including oxygen and usually accompanied by the generation of heat and light in the form of flame. The rate or speed at which the reactants combine is high, in part because of the nature of …

lexie@zozen.com > Get A Quote >

Furnaces and Boilers | Department of Ener

Furnaces and boilers that are not sealed-combustion units draw heated air into the unit for combustion and then send that air up the chimney, wasting the energy that was used to heat the air. Sealed-combustion units avoid that problem and also pose no risk of …

lexie@zozen.com > Get A Quote >

Boiler Combustion | CleanBoiler.o

Combustion control techniques reduce the amount of NOx emission by limiting the amount of NOx formation during the combustion process. This is typically accomplished by lowering flame temperatures. Combustion control techniques are more economical than post combustion methods and are frequently utilized on industrial boilers requiring NOx controls.

lexie@zozen.com > Get A Quote >

Boiler Burners for Commercial or - Webster Combusti

Webster Combustion boiler burners combine proprietary control technology with proven combustion performance to reduce your energy costs and emissions. Whether you need a small or a very large boiler burner, Webster burners combine advanced control technology with proven combustion performance to improve boiler efficiency and enhance your process.

lexie@zozen.com > Get A Quote >

Combustion Control - CCL - Ho

Welcome to the Combustion Control Ltd. Webshop. At Combustion Control, we are the combustion engineers for gas, oil, and LPG. If you wish to purchase any products from us, you can do so here.

lexie@zozen.com > Get A Quote >

Burner Combustion Systems | Steam Boilers – Boiler Servic

Thank you for visiting our website. We are committed to help you with all your combustion needs. Call us now at (281)324-3200. or Fill out the form below and we will respond within 5 …

lexie@zozen.com > Get A Quote >

a summary of technology - Energy Pathwa

CO-COMBUSTION - A SUMMARY OF TECHNOLOGY Co-combustion a summary of technology Co-combustion of biomass or waste together with a base fuel in a boiler is a simple and economically suitable way to replace fossil fuels by biomass and to utilise waste. Co-combustion in a high-efficiency power station means utilisation of biomass and waste with a

lexie@zozen.com > Get A Quote >

Boiler & Burner Engineering Pte L

Boiler & Burner Engineering Pte Ltd which began its operation in April 1996 aims to be a one-stop supplier of combustion control equipment & spares providing sales, competent support and service, comprehensive inventory and value-added customized solution.

lexie@zozen.com > Get A Quote >

Commercial & Industrial Combustion Burners | Boile

Boiler Combustion Industrial Combustion Burner Manufacturers Industrial Combustion Burner Manufacturers The Top Names in the Industry. WARE represents several commercial and industrial combustion burner manufacturers. We provide complete solutions to burner combustion system requirements from standard burners to individually engineered solutions.

lexie@zozen.com > Get A Quote >