steam turbine generator

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

steam turbine generator have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


steam turbine generator.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
steam turbine generator steam turbine generator steam turbine generator

What is Steam Turbine - Description and Characteristi

Steam Turbine. In general, a steam turbine is a rotary heat engine that converts thermal energy contained in the steam to mechanical energy or to electrical energy.In its simplest form, a steam turbine consist of a boiler (steam generator), turbine, condenser, feed pump and a variety of auxiliary devices. Unlike with reciprocating engines, for instance, compression, heating and expansion are

lexie@zozen.com > Get A Quote >

Steam Turbine Electricity Generation Plants - Steam Generat

7/30/2014 · realistic value for the efficiency of the steam turbine would be about 50% Thus the heat engine is responsible for most of the system energy conversion losses. See also Gas Turbines and Heat Engines Electromechanical Energy Transfer (Generator) The steam turbine drives a generator, to convert the mechanical energy into electrical energy.

lexie@zozen.com > Get A Quote >

Steam Turbines: Steam Turbines Manufacturer, Turbine

Steam-Turbines: Steam Turbines Manufacturer in India, also pioneers in Steam Turbine Maintenance, Steam Turbine Solutions, Steam Turbines Spare Parts Supply, Steam Turbines Repair & …

lexie@zozen.com > Get A Quote >

How do steam turbines work? - Explain that Stu

12/28/2018 · Parts of a steam turbine. All steam turbines have the same basic parts, though there's a lot of variation in how they're arranged. Rotor and blades. Photo: Steam turbine blades look a bit like propeller blades but are made from high-performance alloys because the steam flowing past is hot, at high pressure, and traveling fast. Photo of a

lexie@zozen.com > Get A Quote >

Siemens Steam Turbine SST-6

pact steam turbine package with a small oil piping sys-tem, e.g. as a boiler feedwater pump drive. It is also well suited where high-efficiency steam tur-bines are demanded. The Siemens SST-600 is the right answer to meet all of these different needs. Generator drive in various packages We deliver a standard steam turbine generator set

lexie@zozen.com > Get A Quote >

Steam Turbine and Generator User Group 2019 | Mancheste

3/13/2019 · Overview “Excellent networking event which should NOT be missed by UK customers and suppliers” Siemens. Organised by engineers representing the Institution of Mechanical Engineers, the annual Steam Turbine and Generator User Group offers attendees two days of high level technical content and knowledge sharing to support all engineers involved with steam turbine and generator …

lexie@zozen.com > Get A Quote >

Industrial steam turbines | Steam turbines | Sieme

The SST-800 is a single casing steam turbine with center steam admission and reverse steam flow inner casing, designed for a direct coupled generator or mechanical drive. The highly customized turbine provides for an outstanding efficiency, fast start-up times and high reliability and availability.

lexie@zozen.com > Get A Quote >

Steam Turbine Components and Syste

UNESCO – EOLSS SAMPLE CHAPTERS THERMAL POWER PLANTS - Steam Turbine Components and Systems - R.A. Chaplin ©Encyclopedia of Life Support Systems (EOLSS) Both of these have double casings with the exhaust steam circulating in the annular space between the casings as in the case of the high pressure turbine.

lexie@zozen.com > Get A Quote >

Steam Turbine and Generator User Group 2018 | Mancheste

3/21/2018 · Organised by engineers representing the Institution of Mechanical Engineers, the annual Steam Turbine and Generator User Group in March offers attendees two days of high level technical content and knowledge sharing to support all engineers …

lexie@zozen.com > Get A Quote >

Steam generator | Steam Tur

Small Steam Turbine 100 is designed for fueling generators and for electricity production.. The stator for TR 100 is connected to the gear, which allows transformation of the rotations from the turbine rotor to the electricity for asynchronous generator.

lexie@zozen.com > Get A Quote >

Turbine Generator Maintenan

Turbine Generator Maintenance, Inc. (TGM) was founded in 1986 as a steam turbine generator maintenance company. The company has seen exponential growth over the past 30+ years, ultimately becoming the premier alternative to the OEM for non-union turbine services.

lexie@zozen.com > Get A Quote >