autoclaved bricks

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

autoclaved bricks have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


autoclaved bricks.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
autoclaved bricks autoclaved bricks autoclaved bricks

Aero Lite AAC (Autoclaved Aerated Concrete) Bloc

Autoclaved Aerated Concrete(AAC) Blocks Aero Bricks Company Pvt. Ltd. is an endeavor towards building an eco-conscious society where nature and future can grow harmoniously. Modern day construction practices take many points in to consideration.

lexie@zozen.com > Get A Quote >

Aercon AAC Autoclaved Aerated Concre

AERCON AAC is the leading manufacturer of Precast Autoclaved Aerated Concrete Products and prides itself on maintaining the highest level of customer service and support. We are the only Autoclaved Aerated Concrete (AAC) provider that manufactures their product in the United States!

lexie@zozen.com > Get A Quote >

Autoclaved Fly Ash Bricks - Best Photos Of Brick Imagefor.O

12/8/2017 · Autoclaved aerated concrete aac fly ash brick manufacturing hine quality fire resistant fly ash brick plant aac autoclaved aerated concrete blocks article preview autoclave aerated concrete block ion line fully automatic fly ash brick making…Continue Reading

lexie@zozen.com > Get A Quote >

Autoclaved Aerated Concrete | Building Materials Malays

Autoclaved aerated concrete (AAC) is a light precast foam concrete building material. It is made with a combination of cement, fine aggregates and a chemical that give rise to the fresh mixture like bread dough. This type of concrete actually contains 80 percent air.

lexie@zozen.com > Get A Quote >

Lime based steam autoclaved fly ash bricks - ScienceDire

The steam autoclaved fly ash bricks based partly on the formation of this C–S–H phase. CaO–Al 2 O 3 –SiO 2 –H 2 O (C–A–S–H), Hydrogarnet is also found to be formed in the presence of Al 2 O 3, .

lexie@zozen.com > Get A Quote >

7 Types of Concrete Block Used in Building | Qualit

Aerated Autoclaved concrete blocks are lighter and bigger version of bricks. Mostly made with same ingredients as of bricks but with a different composition which made the material a vessel for cost-cutting. Studies show that using autoclaved aerated block has diligently reduced the overall steel and concrete consumption by 15% and 10%.

lexie@zozen.com > Get A Quote >

AUTOCLAvED AERATED CONCRETE MASONRy UNI

AUTOCLAvED AERATED CONCRETE MASONRy UNITS - page 4 AAC IS GREEN Autoclaved Aerated Concrete (AAC) is an environmentally friendly building material that is used to save energy and enhance the quality of the built environment. AAC’s high R-values contribute directly to the goals of higher performing building

lexie@zozen.com > Get A Quote >

Autoclaved Bricks from Tailings - mdpi.c

autoclaved bricks from iron ore tailings were prepared using the model, with their mechanical and freezing resistance properties meeting the requirement of the highest-strength level. It was observed by SEM that the autoclaved bricks had compact structures with a few small pores owing to the reasonable aggregate gradation.

lexie@zozen.com > Get A Quote >

Autoclaved Brick from Steel Slag and Silicon Tailin

The load-bearing brick is made from steel slag and silicon tailings by pressing and autoclaving process. Because of the volume stability, steel slag was ground to above 320 m2/kg and wet cured in 50-60°C at 12-24 hours in the present of additives, before pressure forming and autoclaving process. Tailings account for 63% of the total mass of the brick, while steel slag 30 %.

lexie@zozen.com > Get A Quote >

AAC Blocks - AAC Installation - Aerated Autoclave

ROXSiL AAC Wall Technology is the latest AAC blocks wall installation system. It is a division of ROXSiL Silicone Sdn Bhd, a company specializing in the research and development of products, systems and solutions for the construction industry.

lexie@zozen.com > Get A Quote >

Autoclaved aerated concrete block Manufacturer

autoclaved aerated concrete block manufacturer/supplier, China autoclaved aerated concrete block manufacturer & factory list, find qualified Chinese autoclaved aerated concrete block manufacturers, suppliers, factories, exporters & wholesalers quickly on Made-in-China.com.

lexie@zozen.com > Get A Quote >