whater tube boiler fire tube distance

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

whater tube boiler fire tube distance have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


whater tube boiler fire tube distance.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
whater tube boiler fire tube distance whater tube boiler fire tube distance whater tube boiler fire tube distance

What is difference between water tube boiler and fire tub

May 05, 2017 · Water Tube Boiler: * Water circulates in tubes and heated externally by hot gases. Fuel is burned inside the furnace. i.e (hot gases- outside the tubes and water- inside the tubes). * Operating pressure = upto 100 bar * Efficiency = upto 90% * Ste

lexie@zozen.com > Get A Quote >

Comparison Between Fire Tube and Water Tube Boil

Jun 05, 2018 · Comparison between Fire Tube and Water Tube Boiler can be done in 14 aspects. Those aspects are operating pressure, passage of material type in tubes, rate of steam generation, handling of load fluctuation, floor area requirement, efficiency, operator skills, design, maintenance cost are listed below in the tabular form.

lexie@zozen.com > Get A Quote >

Fire Tube Boiler - Boilersin

What is a Fire tube boiler? The universal type of steam boilers is the smoke tube or fire tube boiler where the heat and gases of combustion (from furnace) pass through tubes that are enclosed by water. While in water tube boilers, water passes through tubes.Mostly used boiler in small and medium industries with different fuels and steam pressure requirements.

lexie@zozen.com > Get A Quote >

Firetube vs Watertube Boilers: a Comparis

Firetube vs Watertube Boilers: a Comparison. Two primary boiler types, the firetube boiler and the watertube boiler, are essentially opposite in design. The firetube boiler passes combustion gas inside a series of tubes surrounded by water in a vessel to produce steam, while a watertube instead sends water through a series of tubes

lexie@zozen.com > Get A Quote >

Fire Tube vs. Water Tube Boilers - Honiron Manufacturi

Dec 07, 2016 · Water Tube Boilers. Unlike fire tube boiler, where the hot gas is circulated through tubes to heat water in a tank, water tube boilers involve running water through tubes surrounded by a heated tank. These types of boiler are generally considered safer than fire tube designs and typically require less frequent maintenance.

lexie@zozen.com > Get A Quote >

Firetube Boilers - The National Board of Boiler an

The boiler consists of a shell, a tube sheet on each end of the shell, and tubes connecting the two tube sheets. The boiler is mounted above a steel or masonry furnace. The products of combustion leave the furnace and are directed through the tubes at one end of the boiler. After passing through the tubes, the products of combustion exit the

lexie@zozen.com > Get A Quote >

Boiler retubing & boiler tube replaceme

Retubing & tube replacement for boilers of all sizes. IB&M specializes in the retubing of firetube boilers, watertube boilers, superheaters, pre-heaters, heat exchangers and other pressure vessels. Boiler tubes must be able to endure extremely high temperatures, pressures, and potentially wide fluctuations in demand depending on the application.

lexie@zozen.com > Get A Quote >

Water Tube Boiler Parts and Functions - Boilersin

We briefly discuss about Water tube boiler parts and functions. D type water tube boiler. In the water tube boiler, the water and steam flow inside the tubes and the hot gases flow over the outside surfaces. Where as in fire tube boilers hot gases from combustion travels through the tubes. flue gases produced from furnace where fuel is burnt

lexie@zozen.com > Get A Quote >

Firetube Boilers vs Watertube Boilers: Which Is Right fo

In a watertube boiler, the heating element acts directly on tubes filled with water, which run through the furnace casing, to produce the needed steam or super-hot water. In a firetube boiler, the heating element produces hot water through a more indirect mechanism. The hot flue gases generated by the boiler’s combustion are channeled into

lexie@zozen.com > Get A Quote >

fire tube boiler | eB

Distance: nearest first; View. Gallery View. Customize. 12 results. Save this search. Not finding what you're looking for? Save fire tube boiler to get e-mail alerts and updates on your eBay Feed. + Items in search results. Crown Velocity Raptor 155K Fire Tube Boiler LP or NG FIRE & WATER TUBE BOILER - 18 Nov 1954 v111 #2791. Pre-Owned. $8

lexie@zozen.com > Get A Quote >