tube steam boiler

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

tube steam boiler have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


tube steam boiler.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
tube steam boiler tube steam boiler tube steam boiler

Fire Tube Steam Boilers - Babcock Wans

Introduction Fire Tube Steam Boilers are the most traditional technique for the production of saturated steam, high pressure hot water or superheated steam for a range of outputs from 250 to 50 000 kg/h (175 to 34 000 kW). Operating Principle Steam is generated by heating a large volume of water in a pressurised drum by means of hot gases, which are produced from the combustion of liquid or

lexie@zozen.com > Get A Quote >

Water Tube Boiler Parts and Functions - Boilersin

We briefly discuss about Water tube boiler parts and functions. D type water tube boiler. In the water tube boiler, the water and steam flow inside the tubes and the hot gases flow over the outside surfaces. Where as in fire tube boilers hot gases from combustion travels through the tubes. flue gases produced from furnace where fuel is burnt.

lexie@zozen.com > Get A Quote >

Fire Tube Boiler - Boilersin

What is a Fire tube boiler? The universal type of steam boilers is the smoke tube or fire tube boiler where the heat and gases of combustion (from furnace) pass through tubes that are enclosed by water. While in water tube boilers, water passes through tubes.Mostly used boiler in small and medium industries with different fuels and steam pressure requirements.

lexie@zozen.com > Get A Quote >

Home - Triangle Tu

“I enjoy installing Triangle Tube boilers and on-demand hot water systems because I know I'm working with a product that is well made and quality built. The boilers are reliable with a well-made heat exchanger. Triangle Tube also has great tech support when and if I need them. My customers are always satisfied and please with Triangle Tube.”

lexie@zozen.com > Get A Quote >

Water and Steam Boilers from Bryan Ste

Water & Steam Boilers from Bryan. Our Full Line of Bryan Boilers. No company sells more flexible steel water tube boilers than Bryan Steam LLC. Bryan was the originator of this type of boiler and has been instrumental in its continuing development. Bryan boilers are easier to install and maintain, perform better, last longer.

lexie@zozen.com > Get A Quote >

Steam Generator vs. Steam Boiler | Powerhou

In a firetube design, a steam boiler is a pressure vessel comprised of a large shell in which the hot gases of combustion pass through one or more boiler tubes connected to the front and rear boiler sheet. The most common firetube type is the scotch marine firetube boiler, which utilizes a large furnace tube and many smaller boiler tubes.

lexie@zozen.com > Get A Quote >

4 Different Designs of the Fire Tube Boiler: Which Is Bes

Dec 02, 2016 · The firebox boiler design utilizes locomotive boilers and fire tube firebox boilers. As a one-pass boiler design, the combustion products pass through the locomotive boiler once. Depending on the arrangement of the tubes and baffles, some firebox boiler designs may be a three-pass or two-pass.

lexie@zozen.com > Get A Quote >

Boiler Working Animation Steam Boilers, Waste Heat Boiler

Feb 23, 2013 · Explains with working animations steam boilers, waste heat boilers and thermal liquid heaters. Learn about boiler designs, advantages and disadvantages etc. These boilers are mainly used in

lexie@zozen.com > Get A Quote >

What You Need to Know About Residential Steam Boile

The steam boiler is an old convection heating technology dating back over 200 years and is commonly found in older homes. Because steam boilers operate at a higher temperature than hot water boilers they are inherently less efficient than their hot water cousins. They are also a lot more finicky to operate.

lexie@zozen.com > Get A Quote >

Water-tube boiler - Wikiped

A high pressure watertube boiler (also spelled water-tube and water tube) is a type of boiler in which water circulates in tubes heated externally by the fire. Fuel is burned inside the furnace, creating hot gas which heats water in the steam-generating tubes.In smaller boilers, additional generating tubes are separate in the furnace, while larger utility boilers rely on the water-filled tubes

lexie@zozen.com > Get A Quote >