autoclave manual

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

autoclave manual have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


autoclave manual.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
autoclave manual autoclave manual autoclave manual

Pelton and Crane Delta Q Autoclave Manuals - Autoclave.Gu

Autoclave Brands; Autoclave Cleaning and Maintenance; Autoclave User Manuals; Pelton and Crane Users Manual; If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to

lexie@zozen.com > Get A Quote >

Instruction Manual for Autoclave/Pressure Steam Steriliz

Instruction Manual for Autoclave/Pressure Steam Sterilizer. Place the Autoclave and sterilizing material on the table or on the shelf. Remove the stopcock whistle/valve from the vent tube fitted at the lid. Twist the lid of the autoclave Anticlockwise and lift the lid. Fill water (appx. 1 liter) in the base chamber.

lexie@zozen.com > Get A Quote >

Manual and manuals for every type of autoclave and steriliz

Alfa delivers those manuals merely as a Public service to you, the customer, so you will be able to operate your sterilizer with maximum safety for you and your staff. Please comply with all operation directions in this manual. Any misuse of a sterilizer or an autoclave, may cause bodily harm Alfa Medical Equipment Specialists Inc., will not be

lexie@zozen.com > Get A Quote >

OPERATION MAINTENANCE MANUAL - torontomicrofluidics.

This manual is intended to give the user a general understanding of how the autoclave works and indicates best ways to operate and maintain it in order to obtain optimum results and a trouble free operation. After reading this manual, operating the autoclave should be straight forward. However, since the autoclave is built using high technology

lexie@zozen.com > Get A Quote >

Download Operation and Maintenance Manuals - Autocla

Parker Autoclave Engineers is a member of the Instrumentation Products Divison of Parker-Hannifin, a global manufacturer of high pressure valves, fittings, tubing, and air-driven liquid pumps. Parker Autoclave Engineers manufacturers products to operate under extreme pressure and temperature conditions. With pressures ranges 10,000 psi, 20,000 psi, 30,000 psi, 60,000 psi, 100,000 psi and

lexie@zozen.com > Get A Quote >

Operation and Maintenance Manual - tuttnauerusa.c

The autoclave has unique characteristics. Please read and understand the operation instructions before first operation of the autoclave. This manual includes instructions and guidance provided by the manufacturer: how to operate the autoclave, the door safety mechanism, and the dangers involved in circumventing safety means,

lexie@zozen.com > Get A Quote >

Manual and manuals for every type of autoclave and steriliz

Please comply with all operation directions in this manual. Any misuse of a sterilizer or an autoclave, may cause bodily harm Alfa Medical Equipment Specialists Inc., will not be responsible for any misuse of the sterilizer or its parts. There is a small fee we charge to cover our shipping and handling.

lexie@zozen.com > Get A Quote >