water pump for boiler

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

water pump for boiler have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


water pump for boiler.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
water pump for boiler water pump for boiler water pump for boiler

Automatic Water Pump For Hot Water Boil

Safe management of industrial steam and hot water 4 of 10 pages Health and Safety Executive Safe management of industrial steam and hot water boilers How regularly your boiler is examined and tested. The boiler house in general.

lexie@zozen.com > Get A Quote >

Boiler feed | Grundf

MAGNA3 circulator pump - heating, cooling, hot water TP(D), TPE(D) inline circulator pump - air-conditioning and heating Water boosting Industrial solutions CM, CME close-coupled horizontal multistage pump CR vertical

lexie@zozen.com > Get A Quote >

How to Install an Indirect Water Heater on a Boiler -

2017/02/19 · Watch the full episode: https://www.thisoldhouse.com/watch/as Ask This Old House plumbing and heating expert Richard Trethewey helps a homeowner install an indirect water heater onto an existing steam

lexie@zozen.com > Get A Quote >

Boiler Feed Pumps | Water Pump Manufacturers Indi

What are Boiler Feed Pumps? As the name implies, Boiler feed pumps (also known as feed pumps) supply a boiler, a nuclear reactor or any other steam generator with feed water that is proportionate to the amount of steam

lexie@zozen.com > Get A Quote >

boiler water pump | eB

Find great deals on eBay for boiler water pump. Shop with confidence. Amounts shown in italicized text are for items listed in currency other than U.S. dollars and are approximate conversions to U.S. dollars based upon Bloomberg

lexie@zozen.com > Get A Quote >

Boiler Feed Pump (BFP)

Boiler Feed Pump (BFP) Ebara Engineering Review No. 251(2016-4) 13 for gas turbines, LNG−a fuel that emits less carbon dioxide−and therefore impose less environmental load. These plants require BFPs that feed water

lexie@zozen.com > Get A Quote >

Hot Water End Suction Pump For Steam Boil

Can-Your-Boiler-Feed-Pump-Ha.pdf | Steam | Pump "Analysis of Feedwater Pump Suction Pressure Decay. due to the time it takes for this hot-water slug in the pump suction line to pass. the pump suction vapor pressure does not

lexie@zozen.com > Get A Quote >

Feed water and steam system components -

4 mesh. Demisters remove and capture any remaining droplets that may have passed through the cyclones. The water that condenses from the demisters is re-circulated through the boiler’s circulation process. Steam purity and

lexie@zozen.com > Get A Quote >

Circulator Pumps: Hot Water Heating System Circulato

Heating Circulator Pumps: how are circulators used to control heating zones & how do we Diagnose & Fix Circulator Pump Troubles? Heating circulator pumps or "zone circulators" are used to force hot water from the heating boiler

lexie@zozen.com > Get A Quote >

hot water boiler pu

ZOZEN's main products include industrial boilers, power station boilers, waste heat recovery devices (HRSG), special waste heat boilers, pressure vessels and other five series with more than 400 varieties of specifications, mainly

lexie@zozen.com > Get A Quote >

Boiler shunt | Grundf

The boiler shunt pump circulates the water from the flow pipe into the return pipe or directly into the boiler. Max. temperature difference is approx. 10-20 C. For certain types of fuel, very low temperatures can cause corrosion at the

lexie@zozen.com > Get A Quote >