waste heat recover plant

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages

waste heat recover plant have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

waste heat recover plant.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
waste heat recover plant waste heat recover plant waste heat recover plant

Waste Heat Recovery for the Cement Sect

Waste Heat Recovery for the Cement Sector v Mexico 44 Current Status of Cement Industry 44 Current Status of WHR

lexie@zozen.com > Get A Quote >

Demonstration of a Waste Heat Recovery System

Demonstration of a Waste Heat Recovery System at a Steel Plant in India –Reducing Electricity Consumption by 6%– The New Energy and Industrial Technology Development Organization (NEDO),

lexie@zozen.com > Get A Quote >

waste heat recovery boiler for food pla

Related Posts Best Selling Waste Heat Recovery Boiler Cement Plant Low Noise Waste Heat Recovery Boiler In Sponge Iron Plant tube type of waste heat recovery boiler in cement plant in Netherlands Large Scale Waste Heat

lexie@zozen.com > Get A Quote >

waste heat recovery from sulphuric acid making pla

Related Posts Waste Heat Recovery Boiler In Sponge Iron Plant tube type of waste heat recovery boiler in cement plant in Netherlands Large Scale Waste Heat Recovery Boiler In Cement Plant Genuine Large Scale Waste Heat

lexie@zozen.com > Get A Quote >

Waste heat recovery - Alfa Lav

1.2 Waste heat recovery An effective way to increase energy efficiency is to recover waste heat. The process industry mainly consumes two types of energy: • Fossil fuel to generate process heat • Electric energy to drive motors

lexie@zozen.com > Get A Quote >

recover waste heat - Japanese translation – Lingu

Many translated example sentences containing "recover waste heat" – Japanese-English dictionary and search engine for Japanese translations.

lexie@zozen.com > Get A Quote >

Waste Heat Recovery Methods And Technologies -

An example is the use of an air preheater to recover waste heat from fluegases instead of generating steam or installing a hot oil circuit. Whenever possible, waste heat streams having similar temperatures should be combined to

lexie@zozen.com > Get A Quote >

Energy Plants | Kawasaki Heavy Industri

Cement Waste Heat Power Plant Boiler Facilities Fluidized Bed Boiler Kawasaki Advanced Clean Combustion (KACC) Boiler Soda Recovery Boiler Heat Recovery Steam Generator (HRSG) Marine Boiler Cement Waste Heat

lexie@zozen.com > Get A Quote >

Brochure: Waste Heat Recovery - Home - English -

www.siemens.com / energy / orc Waste Heat Recovery with Organic Rankine Cycle Technology Power Generation with the Siemens ORC-Module Power Generation Scan the QR code with the QR code reader in your mobile!

lexie@zozen.com > Get A Quote >

Recovering Waste Heat: Energy Efficiency for Industrial

Hodgkinson Bennis can help increase energy efficiency in industrial plant with an economiser which acts to recover waste heat and reduces fuel usage. Here at Hodgkinson Bennis, we know that companies are constantly under

lexie@zozen.com > Get A Quote >

ORC systems for Waste Heat Recovery | TURBOD

ORC size location customer status notes 2 MWe Ait Baha, Morocco Ciments Du Maroc In operation since 2010 Electric power production from waste heat in cement production process + CSP (Hybrid plant) 4 MWe Aleşd, Romania

lexie@zozen.com > Get A Quote >