single drum boiler

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

single drum boiler have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


single drum boiler.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
single drum boiler single drum boiler single drum boiler

Single Drum Boiler, Single Drum Construction, Sell Singl

Single drum boiler We are one of the leading manufacturers and exporters of Bi Drum Boilers in the market. Fabricated using optimum quality raw materials procured from trusted vendors, our Bi Drum Boilers are extremely robust and corrosion resistant.

lexie@zozen.com > Get A Quote >

Bi-drum vs.Single Drum Boilers - Thermodyne Technologi

of boiler design combined with boiler operational feed back provide the input to customize the right boiler configuration considering the fuels to be used, with focus on maintaining the steam parameters and trouble free boiler operation. The paper discusses the comparison of Bi-drum vs. Single Drum design features and also

lexie@zozen.com > Get A Quote >

Three-drum boiler - Wikiped

Three-drum boilers are a class of water-tube boiler used to generate steam, typically to power ships.They are compact and of high evaporative power, factors that encourage this use. Other boiler designs may be more efficient, although bulkier, and so the three-drum pattern was rare as a land-based stationary boiler.

lexie@zozen.com > Get A Quote >

Steam Boiler|Thermic Fluid Heater|Power Boiler|Hot Ai

4 Pass, Single Drum 100% Water Tube FBC Steam Boiler Single Drum Water Tube , in Corner Pipes & Membrane Wall Configuration FBC Steam Boiler Bi-Drum Water Tube FBC Steam Boiler 3 Pass Horizontal Smoke cum Water Tube Skid mounted Package Steam Boiler …

lexie@zozen.com > Get A Quote >

Steam Boiler|Thermic Fluid Heater|Power Boiler|Hot Ai

Single Drum Corner pipes design, which is the only choice for a very high pressure and temperature Boiler, is being offered even for medium pressure Boiler which is highly acclaimed all over ward for it's reliability of performance & sturdiness.

lexie@zozen.com > Get A Quote >

Boiler Drum Level Control - Eurothe

Can best be applied to single boiler / single feedpump configurations with a constant feedwater pressure . Three-element drum level control. The three-element drum level control is ideally suited where a boiler plant consists of multiple boilers and multiple feedwater pumps or where the feedwater has variations in pressure or flow.

lexie@zozen.com > Get A Quote >

single drum boiler – Oil Fired Boiler For Sa

Steam Boiler: Single Element Drum Level Control. 2019-3-17 · Single element drum level control is one of methods to control drum or boiler level control. The level control of water/steam is commonly discussed in one among 3 main methods such as single element drum level control, two element drum level control and also three element drum level

lexie@zozen.com > Get A Quote >

natural circulation boiler efficiency curve – Single Dru

This boiler is single drum boiler with both water tube and fire tube, the combustion equipment is moving grate. the temperature of tube plate is lower than 600℃ Customer Visiting Welcome come to Sitong Boiler for investigation.Sitong Boiler is the professor of industrial boiler manufacturer, with the certificates of ISO 9001, CE, SGS, BV, etc..

lexie@zozen.com > Get A Quote >

Single Drum Boiler Manufacturer – [email protecte

This boiler is single drum boiler with both water tube and fire tube, the combustion equipment is moving grate. the temperature of tube plate is lower than 600℃ Customer Visiting Welcome come to Sitong Boiler for investigation.Sitong Boiler is the professor of industrial boiler manufacturer, with the certificates of ISO 9001, CE, SGS, BV, etc..

lexie@zozen.com > Get A Quote >

Bi-drum and Single Drum Boilers - Bright Hub Engineeri

Bi-drum boilers find its use in industrial steam generators very widely as they are capable of handling lot of load fluctuations. This is mainly due to the reason that the water reserve available is very high when compared to single drum. The single drum boilers can be designed for very high pressures and flows, even close to critical pressures.

lexie@zozen.com > Get A Quote >

Single Drum Boiler | Steam Team Zimbab

Powerpac – Single drum boiler Next generation water tube boiler Continuing the legacy of product innovation Thermax is now introducing next generation water tube boiler Powerpac-SD. The need of hour from customers is to have a packaged high efficiency boiler with cogeneration, multi fuel flexibility, minimum site work, with automated system.

lexie@zozen.com > Get A Quote >