refinery boiler

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

refinery boiler have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


refinery boiler.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
refinery boiler refinery boiler refinery boiler

Chemical & Refinery Boilers | Boiler Services | N

Chemical & Refinery Boiler Types. Chemical & Refinery boiler types are subjected to constantly changing conditions and are at high risk for boiler corrosion, tube scale, fouling, and/or failure of critical equipment such as economizers and turbines. Our chemical cleaning process can remove residual deposits of rust and mill-scale

lexie@zozen.com > Get A Quote >

Which type of boilers are used in an oil refinery? - Quo

May 29, 2018 · In refinery boiler are usually runs on waste fuel gas, that are collected during process of crude product. So boiler are selected that can run on refinery fuel gas & low value fuel available inside refinery.

lexie@zozen.com > Get A Quote >

+refinery +boiler – Industrial Steam Generator/Boil

Mar 13, 2019 · We average 120 outages and 800,000 project hours annually, devoting more than 300 years of combined experience to servicing and installing industrial boilers and essential …Oil refinery – Wikipedia2019-3-4 · Oil refinery or petroleum refinery is an industrial process plant where crude oil is transformed and refined into more useful

lexie@zozen.com > Get A Quote >

How Power Plant Boiler Works? - brighthubengineering.c

‘Boiler feed water pump’ pumps the water at high pressure into the boiler from the ‘feed water tank’. The pump is akin to the heart in the human body. 'Feed water heaters’, using extracted steam from the turbine, adds a part of the sensible heat even before the water enters the boiler. Economiser.

lexie@zozen.com > Get A Quote >

CO boilers - natural circulation | Amec Foster Wheele

CO boilers - natural circulation This adiabatic combustor type with a vertical tube convection section is another option for recovery of heat to natural circulation steam generation. This design incorporates the steam and mud drums with the vertical heat recovery surface eliminating the circulation pumps.

lexie@zozen.com > Get A Quote >

Refinery Boilers, Refinery Boilers Suppliers an

About 4% of these are boilers. A wide variety of refinery boilers options are available to you, such as natural circulation, once through. You can also choose from industrial, power station. As well as from fire tube, water tube. And whether refinery boilers is horizontal, or vertical. There are 2,391 refinery boilers suppliers, mainly located in Asia.

lexie@zozen.com > Get A Quote >

Controlling CO boilers - digitalrefining.c

In the industrial boiler, steam supply is the independent control variable. Increased steam demand requires increased air and fuel flow into the boiler to maintain a constant combustion excess air set point while the bulk flue gas temperature is allowed to vary.

lexie@zozen.com > Get A Quote >

Refining | Industrial Boilers Ameri

An oil refinery is considered an essential part of the downstream side of the petroleum industry. Raw or unprocessed crude oil is not generally useful in industrial applications, although “light, sweet” (low viscosity, low sulfur) crude oil has been used directly as a burner fuel to produce steam for the propulsion of sea-going vessels.

lexie@zozen.com > Get A Quote >

Refinery Boiler - emetreinta.

Refinery Boiler Oil refinery - Wikipedia Oil refinery or petroleum refinery is an industrial process plant where crude oil is transformed and refined into more useful products such as petroleum naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, liquefied petroleum gas, jet fuel and fuel oils.

lexie@zozen.com > Get A Quote >

Refinery Boilers - Indeck Keystone Ener

Boilers are one of the most fundamental systems of a refinery or plant. They are literally the pieces of equipment that keep the plant up and running. They may be used to produce steam for powering turbines and pumps or for heating of facilities and processes.

lexie@zozen.com > Get A Quote >

How Boilers Keep the Plants and Refineries Running Smooth

Oct 28, 2013 · Boilers are one of the most fundamental systems of a refinery or plant. They are literally the pieces of equipment that keep the plant up and running. However, they are one of the least discussed aspects of the plants because the focus is typically on the quantity and quality of their actual product output, or about the cost of the fuel and raw materials that are coming in.

lexie@zozen.com > Get A Quote >