shell type fuel tube steam boilers

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

shell type fuel tube steam boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


shell type fuel tube steam boilers.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
shell type fuel tube steam boilers shell type fuel tube steam boilers shell type fuel tube steam boilers

Shell type Steam Boilers - Shell type Steam Boiler

Isotex offers Oil and Gas fired shell type steam boilers in capacities upto 16 tons of steaming per hour. Isotex Shell type oil and gas fired boilers are flexible in design and are capable of firing a wide range of fuels, including heavy fuels and dual fuel options.

lexie@zozen.com > Get A Quote >

LEARNING FOR EXCELLENT: Type of boile

Once delivered to site, it requires only the steam, water pipe work, fuel supply and electrical connections to be made for it to become operational. Package boilers are generally of shell type with fire tube design so as to achieve high heat transfer rates by both radiation and convection.

lexie@zozen.com > Get A Quote >

Steam Boile

We manufacture Coil type Boilers, Shell & Tube type Steam Boilers and also the Thermic Fluid Heaters for all type of fuel Oil/Gas/Coal fuel. Apart from this, we also manufacture Pressure Vessels, Reactors, Heat Exchangers, Condensers, Storage Tanks.

lexie@zozen.com > Get A Quote >

Solid Fuel Fired, 3 Pass, Shell Type, Flue Tube Stea

The Solid Fuel Fired Shell Type Flue Tube Steam Boiler is a horizontal shell type integral furnace, flue tube, solid fuel fired steam boiler. Capacities available are from 500Kgs/hr upto 3 Tonnes/hr steam in single furnace design and upto 6 Tonnes/hr steam in double furnace design.

lexie@zozen.com > Get A Quote >

Small Industrial Steam Boilers | Baby Boiler Manufacturer

Any shell type steam generating boiler under the pressure of up to 7 Kg/cm 2 and having a volumetric capacity of all pressure parts connected to the same boiler is greater than 25 Litres but less than 500 Litres are known as shell type Small Industrial Boilers. A coil type, water tube or once-through boilers under the pressure of up to 12 Kg/cm

lexie@zozen.com > Get A Quote >

shell type flue tube steam boilers - rakshaksfoundation.o

High Pressure Boilers Working. Before converting to steam, water circulates multiple times from shell (water drum) to water tubes and then back to shell.During the circulation, the temperature of water increases as it comes in indirect contact with flue gases that transfer heat through tubes. learn More

lexie@zozen.com > Get A Quote >

d-type-water-tube-steam - steam boilers - SaudiBoiler.c

D type water tube, steam boilers consist of a mud drum and an upper steam drum. The design is a well proven and reliable design for high pressure and high capacity steam producing systems. The large and sufficient combustion chamber allows the use of different types of oil and gas fuel efficiently.

lexie@zozen.com > Get A Quote >

Solid Fuel Fired, 2 Pass, Shell Type, Flue Tube Stea

Steam boilers in the output range of 200 to 600 kg/hr are manufactured in two-pass smoke-tube, dry back compact shell type configuration and designed in conformity with SIB/Class 1 IBR codes.

lexie@zozen.com > Get A Quote >

Shell Tube Boiler - Manufacturers, Suppliers & Deale

Find here details of shell tube boiler manufacturers, suppliers, dealers, traders & exporters from India. Water Tube Boilers, Shell Type Steam Boilers, Water Tube Biomass Boiler, Smoke Tube Type Boilers, Smock Tube Steam Boiler, Water Tube Steam Boiler, Fire Tube Type Boiler, Fire Tube Type Steam Boiler Solid Fuel Shell Type Boiler

lexie@zozen.com > Get A Quote >

21MW peanut shell steam boiler | Gas Boilers Suppli

Except wood chips, the SZL series boiler could burn other biomass fuel as well, such as bamboo chips, straw, rice hull, peanut shell, bagasse, cotton stalk, coconut shell, corncob, Horizontal Oil/Gas Fired Steam Boilers | Reliable steam boiler Description of Horizontal Oil/Gas Steam Boilers Horizontal oil or gas fired steam generators / steam …

lexie@zozen.com > Get A Quote >

Steam Boilers - Steam Non IBR Boiler Manufacturer fro

We are looking and able to supply used power plants in condensing & back pressure type, and full range of steam boilers of water tube, smoke tube-package, membrane, waterwall type, fluid bed combustion FBC, using fuel like coal, lignite, wood, baggase, husk, natural gas, oil fired. Sale & buy all types of used steam boilers & turbines.

lexie@zozen.com > Get A Quote >