autoclave types

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

autoclave types have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


autoclave types.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
autoclave types autoclave types autoclave types

Autoclave | Autoclaves | Sterilizer | Sterilize

When you need an autoclave that will sterilize your instruments, Alfa is the source for all your autoclaves and sterilizers needs. Sterilizers and autoclave available for all needs. Steam new Steam refurbished Dry Heats Repairs

lexie@zozen.com > Get A Quote >

Autoclave Machine: Uses, Guidelines & Cost |

Everything About Autoclaves What is an autoclave? Autoclaves are also known as steam sterilizers, and are typically used for healthcare or industrial applications. An autoclave is a machine that uses steam under pressure to kill

lexie@zozen.com > Get A Quote >

Technical Informati

All general terms and conditions of sale, including limitations of our liailit, appl to all products and services sold 1 The information presented in this section is intended to assist designers in the proper selection of Parker Autoclave Engi

lexie@zozen.com > Get A Quote >

How does an autoclave work? - Explain that Stu

What is an autoclave? Photo: Closing the door on a typical laboratory autoclave. Note the large handle on the right being used to seal the door completely. Also note the dials on the right-hand side that indicate temperature and

lexie@zozen.com > Get A Quote >

What Is Autoclave? Its Types, Use and Reliabl

Types of Autoclave Today they differentiate several different types. The simplest one reminds a pressure cooker. This is a large pot with bolts that fasten the top. The water that is inside the container is heated above the boiling point

lexie@zozen.com > Get A Quote >

OPERATION OF THE AUTOCLAVES - VL

Howard Judelson 6/28/04 Chamberland (1851-1908), inventor of the autoclave Papin’s steamcooker OPERATION OF THE AUTOCLAVES Part 1. General autoclave wisdom from Howard Part 2. Specific instructions for the "new" and

lexie@zozen.com > Get A Quote >

Medical Autoclave Machine Steam Sterilizer Manufactur

Hefei Sada Medical Equipment Co.,Ltd. is Medical Autoclave Machine Steam Sterilizer Manufacturer. Choose from different medical autoclave,including autoclave sterilizer and steam sterilizer. Competitive price at sadalimited.com.

lexie@zozen.com > Get A Quote >

Medical autoclave sterilizers - Autoclave Manufacture

Medical autoclave sterilizers and low temp sterilizers manufactured by Tuttnauer for CSSD and operating room (OR) applications. Reliable and easy to operate with vacuum, liquid, gravity and flash cycles, we are very proud of the high

lexie@zozen.com > Get A Quote >

Types of Autoclaves | Healthful

Types of Autoclaves. An autoclave is a device that is used to sterilize medical, beautician and other equipment such as tattooing and piercing paraphernalia. The basic function of the machine is to kill bacteria. This is done through

lexie@zozen.com > Get A Quote >

Autoclave Types - ASC Process Syste

Autoclaves by ASC come in all types and size. While ASC specializes in composite bonding autoclaves, we also have extensive experience in autoclaves for processing concrete, wood, nuclear, and glass worldwide.

lexie@zozen.com > Get A Quote >

Autoclave Validati

Common Types • Production autoclave. – Usually large – Loads one side, unloads the other – Used to sterilize production equipment – May be used to sterilize filled product (can have one opening) – If faulty, potential impact on

lexie@zozen.com > Get A Quote >