Philippine Power Plant Use Circulating Fluidised Bed Technology

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages

Philippine Power Plant Use Circulating Fluidised Bed Technology have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

Philippine Power Plant Use Circulating Fluidised Bed Technology.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
Philippine Power Plant Use Circulating Fluidised Bed Technology Philippine Power Plant Use Circulating Fluidised Bed Technology Philippine Power Plant Use Circulating Fluidised Bed Technology

fluidised bed technology - an overview | ScienceDirect

P. Vainikka, K. Sipilä, in Waste to Energy Conversion Technology, 2013 7.3 Direct fluidised-bed combustion There is increasing global interest in fluidised beds at the utility scale. This is due to the fact that coals available for power > Get A Quote >

Technology Overview Circulating Fluidized-bed

In the circulating bed, the entire reactor contains solids of significantly lower density than in conventional FBs, and the degree of gas/solids contact over the entire reactor height leads to longer contact times in the CFB, even at the > Get A Quote >

40 Years of Power Plants Based on Circulating

Doosan Lentjes 40 Years of Power Plants Based on Circulating Fluidized Bed Combustion (CFBC) – a successful technology through the ages Speaker: Reinhard K.W. Knittel Doosan Lentjes GmbH Germany Presented at: VGB > Get A Quote >

cfb power plant – Industrial Boiler Suppli

CFB Power Plant Boiler,cfb boiler-ZG® Boiler Energy-saving circulating fluidized bed power plant boiler as one of the circulating fluidized bed boilers, it utilizes stationary design theory and CFB technology … Circulating fluidized > Get A Quote >

Circulating fluidised bed co-combustion of coal and

1 Enviado para publicar por Elsevier: Fuel 83 (2004) 277–286 Circulating fluidised bed co-combustion of coal and biomass Pilar Gayana, Juan Adaneza,*, Luis F. de Diegoa, Francisco García-Labianoa, Andres Cabanillasb, Alberto > Get A Quote >

Lagisza Power Plant - Power Technology | Energy News

Foster Wheeler supplied the circulating fluidised bed, which first gasifies the fuel, for the Lagisza Power Plant. Firing concepts for the Siemens Benson vertical once-through unit (OTU) used by Foster Wheeler in the Lagisza Power > Get A Quote >

ANDRITZ to supply a highly efficient, biomass-fired

International technology group ANDRITZ has received an order from Mitsui Engineering & Shipbuilding Co., Ltd. (MES), Japan, to deliver a PowerFluid circulating fluidized bed boiler with flue gas cleaning system for a new biomass > Get A Quote >

Projects of CFB boiler and CFB boiler pla

Biomass CFB Boiler Plant in Bahamas In Bahamas, the biomass can be burned using conventional combustion technology like grate furnace or fluidized bed boilers. For power generation the biomass would be charged to the furnace > Get A Quote >

How Circulating Fluidized Bed Boilers Wor

Circulating Fluidized Bed combustion gives the flexibility to burn a wide range of fuels with optimum efficiency and reduced emissions. How does this technology work ? How is it different ? What are the advantages ? This article series > Get A Quote >

Operating experience of low grade fuels in

IEA Clean Coal Centre– Operating experience of low grade fuels in circulating fluidised bed combustion (CFBC) boilers 3 Preface This report has been produced by IEA Clean Coal Centre and is based on a survey and analysis of > Get A Quote >

Sumitomo SHI FW – Global CFB Boiler and CFB

Circulating fluidised bed scrubber technology (Modern Power Systems) May 21, 2019 - A low-cost dry flexible multi-pollutant emissions control option for the Indian power market SHI Secures Order for a Dedicated Biomass > Get A Quote >