4500 tph cfbc boiler brochures

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages

4500 tph cfbc boiler brochures have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.

4500 tph cfbc boiler brochures.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
4500 tph cfbc boiler brochures 4500 tph cfbc boiler brochures 4500 tph cfbc boiler brochures


Emission values from the datasheet of new CFB biomass plants. See references and notes in the datasheet 'Large Biomass Circulating Fluidized Bed Combustion Systems (CFBC) for wood'. Typically the electricity efficiency will be 3-4 % point lower than that of the plant prior to conversion.

lexie@zozen.com > Get A Quote >

book economy.pdf - DocShare.ti

Energy Resources and Systems Tushar K. Ghosh • Mark A. Prelas Energy Resources and Systems Volume 1: Fundamentals and Non-Renewable Resources Tushar K. Ghosh

lexie@zozen.com > Get A Quote >

bed cogeneration air: Topics by Science.g

5/1/2018 · Rapid ignition of fluidized bed boiler. DOEpatents. Osborn, Liman D. 1976-12-14. A fluidized bed boiler is started up by directing into the static bed of inert and carbonaceous granules a downwardly angled burner so that the hot gases cause spouting. Air is introduced into the bed at a rate insufficient to fluidize the entire bed.

lexie@zozen.com > Get A Quote >

typical water quality for boilers - insm-abwassermonitor.

Boiler Introduction | CleanBoiler.org. General Boiler Information. Superheat is a term that refers to higher temperature steam, as a result of a second special steam heat exchanger in the boiler that allows steam pressure to increase, thereby taking on more BTUs (in excess of 500 psi is typical of superheat).

lexie@zozen.com > Get A Quote >

Paper 2 SetB 090410 Key | Boiler | Ste

2 Marks S-2 For a 8 TPH capacity boiler, estimate the rise in temperature of water in an economizer. The flue gas temperature decreases from 315 C to 200 C in the economiser. Air to fuel ratio and evaporation ratio of the boiler are 20 kg of air/kg of fuel and 12 respectively. …

lexie@zozen.com > Get A Quote >

o _ m Manual Vol 1 Cfbc Boiler(Bg013) | Fluidization (5

2.1.2 Characteristics of CFBC Boiler. A CFBC boiler consists of combustion chamber, hot cyclone separator, convection section (back pass) and bed ash coolers. Compared to bubbling fluidized bed, the relatively higher fluidizing velocity adopted in CFBC boiler causes the dense mixture of solids to move up through the combustion chamber.

lexie@zozen.com > Get A Quote >

pebble bed storage: Topics by Science.g

2/1/2018 · Sample records for pebble bed storage (CFBC) for heating air during generating periods. The use of a coal-fired CFBC unit for indirect heating of the compressed air, in lieu of the current turbomachinery combustors, would eliminate the need for expensive premium fuels by a CAES facility. The CAES plant generation heat rate is approximately

lexie@zozen.com > Get A Quote >