3 phase steam generator for steam room

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

3 phase steam generator for steam room have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


3 phase steam generator for steam room.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
3 phase steam generator for steam room 3 phase steam generator for steam room 3 phase steam generator for steam room

Steam Generators - Sauna & Steam

Tylo steam generators have proven reliability. The generator can be positioned out of sight while the compact electronic control sets the temperature and the time of operation. The steam flows into the steam room within a few minutes of start up. The size of the steam room determines the output of …

lexie@zozen.com > Get A Quote >

Steam Room 1 - Lattner Boil

Steambath Generator; 9 KW to timers, steam flow valves, and automatic blowdown valve for bottom of generator. be reconnected during installation. Options include: automatic room temperature controls, service. cut-offs. All joints and seams are welded, and hydrostatically tested. All boilers completely required. No-tube design eliminates

lexie@zozen.com > Get A Quote >

Steam Bath Generator - Steam Bath Generators Manufacture

Steam bath generator capacity 6.0 kw with digital control panel and with auto Drain system. Functions: The control works with the steam generator to maintain a perfect level of steam and temperature in the room, while using the least amount of energy, reaching a result of soft and comfortable environment.

lexie@zozen.com > Get A Quote >

Steam Generator, Steam Generator Suppliers an

Alibaba.com offers 22,924 steam generator products. About 42% of these are boilers, 8% are sauna rooms, and 1% are other car cleaning tools. A wide variety of steam generator options are available to you, such as wet steam, dry steam, and far infrared.

lexie@zozen.com > Get A Quote >

ThermaS

ThermaSol offers four commercial steam generator lines including: SuperDuty, our most powerful steam generator design to date; PowerPak for steam room demand under 8 hours per day; SteamSuite for providing steam in up to four guest rooms; and DaySpa for …

lexie@zozen.com > Get A Quote >

M STEAM E STEAM BATH® RESIDENTIAL STEAM GENERATORS

Steam Bath® Installation, Operation & Maintenance Manual 3 Steam Sauna Inc manufactures steam generators for any steam bath need. They are the result of many years of continued research. From the smallest residential unit to the largest commercial unit, our products are manufactured

lexie@zozen.com > Get A Quote >

Amerec Store Amerec Steam baths steam rooms steam shower

Amerec Steam Baths and Saunas, Steam baths and Saunas and steam showers, generators and steam room units. For that added touch, we have aroma steam and aromatherapy oils for your steambath or steam showers, home sauna room or home spa

lexie@zozen.com > Get A Quote >

3 phase steam generator - degrensvoorbij.

3 phase steam generator - Alibaba. Sponsored Listing The Economic steam generator features auto water supplementary system, over-pressure and over-heat protection. The power of the steam generator is equal to the CBM of the room, (eg: a 8m³ room should use a 8kw steam generator) 3).

lexie@zozen.com > Get A Quote >

Steam Generators - Gold Coast Saun

STEAM GENERATOR - 3 HEATING ELEMENTS. This SAWO STP Steam Generator with 3 heating elements is ideal for medium size steam rooms. It is available in a 3-Phase power supply or 1-Phase convertible to 3-Phase connection. It means that it can be used for residential or commercial purposes or with higher or different power supply requirements.

lexie@zozen.com > Get A Quote >

Amerec - 3K12 - 3K Series Steam Bath Generator, 12KW, 208

Designed for steam bath enclosures up to 500 adjusted cubic feet and where 208V AC 3 Phase electric is available, this 3K Series generator requires use of a K30, K60 or DK60/30 control package. Consider the optional ADK Automatic Drain System for routine maintenance draining after each use.

lexie@zozen.com > Get A Quote >

Steam Generators – Precision Boile

STEAM GENERATORS. Precision steam generators provide large volumes of high quality steam, when you need it, where you need it, every time you need it, without wasting energy waiting for that call for steam. Our steam generators are manufactured to stringent industry standards, with a wide variety of specifications for a range of applications.

lexie@zozen.com > Get A Quote >