modern high pressure high duty boilers

Industrial boilers

Product thermal capacity: 4-35 t/h

Working pressure: 1.0-2.5 MPA

Outlet temperature: 184-350 ℃

Available fuel: natural gas, coke oven gas, bio-gas,liquid propane gas, diesel, heavy oil, light oil, crude oil

Available industries: Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries

  • Product introduction
  • Technical advantages
Introduction

modern high pressure high duty boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.


modern high pressure high duty boilers.This type of heater is delivered as a whole, and is installed on site, it only needs to connect thermal gas(oil) piping and electricity to start operation. The heater has four heating areas: furnace radiation heating area, the first convection tube bundle heating area, the second convection tube bundle heating area and economizer (waste heat boiler).

Digitized manufacture
  • The laying-off of steel tube adopts CNC 3D laser cutting machine.
  • The manufacture of round coil tube adopts CNC coil tube automatic production line. Once-forming and no need for plastic .
Full argon arc welding
  • The tube butt adopts argon arc welding technique and the seams will be done x ray real-time imaging, preventing unqualified seams from entering coil production line .
Easy operation
  • Heater is wholly assembled before delivery, it is easy for installation, debugging and operating.
  • Fully automatic operating, burning, liquid level of high level tank, outlet temperature and flow rate are adjusted automatically and self-protected.
  • The inlet and outlet with end flanges and flanged cover structure facilitate the installation and layout of tubeline in boiler house.
Less fuel consumption
  • Internal side adopts good insulation material, outside uses stainless steel plate, which can mostly reduce heat lost and make working environment better.
  • Multilayers closely spaced tube bundle and steel rod is used to seal and fix, completely eradicating short circuit of flue gas.
  • Before delivery, the residue moisture is removed completely, so the system draining period is reduced to 2 days from 12 days.
Safely operation
  • The inner coil tube has bigger flow rate, so it is more stable under high temperature operation.
  • Conical coil effectively protects the furnace wall at the end of heater and burner on the top.
modern high pressure high duty boilers modern high pressure high duty boilers modern high pressure high duty boilers

High Pressure Boilers | Boiler | Steam - Scri

HIGH PRESSURE. BOILERS M.S.R.K CHAITANYA [email protected] LA MONT BOILER DESCRIPTION Steam separator drum. The la Mont boiler consists of a steam separator drum which is placed wholly outside the boiler setting . The drum receives a mixture of steam and water from the evaporator tubes and feed water from the economizer. The steam is separated from water in the drum.

lexie@zozen.com > Get A Quote >

low pressure water tube boiler - flashpoints.com.

Types and Classifications of Industrial Boilers. According to ASME there every boiler have pressure above 15 PSI is called high pressure boiler. but generally Low pressure boilers having pressure below 300 psi (Bulk Boiling). Medium pressure Boilers having pressure range between 300 psi to 800 psi (mixed Nucleate or bulk Boiling). Get a Quote

lexie@zozen.com > Get A Quote >

TT BOILERS Mobile Steam Boilers & Containe

The Mobile Steam Boilers are delivered as customised portable solutions on trailers, in containers or build up on a skid-mounted frame. These mobile steam boilers are based on the compact and heavy-duty TT BOILERS steam generator boiler design type DT / DTM.

lexie@zozen.com > Get A Quote >

High Pressure Steam Boiler Feed Water Pump, High - Aliba

Alibaba.com offers 289 high pressure steam boiler feed water pump products. About 58% of these are pumps. A wide variety of high pressure steam boiler feed water pump options are available to you, such as multistage pump, single-stage pump, and piston pump.

lexie@zozen.com > Get A Quote >

Essential Boiler Instrumentation and Contro

Essential Boiler Instrumentation and Controls Abstract Many of the low pressure, old sugar plant boilers are working negligible or no instrumentation. The modern day high pressure boilers which are provided with optimised heat transfer areas for its rated duty require some of the important operating

lexie@zozen.com > Get A Quote >

Boiler Design Basic Steps - boilersinfo.c

Boiler design is the process of designing boilers used for various purposes. The main function of a boiler is to heat water for steam generation. Steam produced can be used for a variety of purposes including space heating , sterilization, drying, humidification and power generation. The temperature or condition of steam required for these applications is different, so how to design a boiler …

lexie@zozen.com > Get A Quote >

Industrial boiler technology for beginne

the flue gases, these boilers are also called three-pass shell boilers. Industrial boiler systems can cope with much higher pressures than pressure cookers. These boilers are welded from thick steel plates that are up to 35 mm thick, making pressures of 30 bar and more possible.

lexie@zozen.com > Get A Quote >

Boiler - Wikiped

The pump used to charge the boiler must be able to overcome the boiler's operating pressure, else water will not flow. As a superheated boiler is usually operated at high pressure, the corresponding feedwater pressure must be even higher, demanding a more robust pump design. Another consideration is safety.

lexie@zozen.com > Get A Quote >

High pressure commercial hot water boilers | Viessma

High pressure hot water boilers from Viessmann are the result of decades of research, development and testing - not just in our factory but also through numerous installations around the world. The result is our advanced heating systems that both meet and exceed key …

lexie@zozen.com > Get A Quote >

Fire-tube boiler - Wikiped

The fire-tube boiler developed as the third of the four major historical types of boilers: low-pressure tank or "haystack" boilers, flued boilers with one or two large flues, fire-tube boilers with many small tubes, and high-pressure water-tube boilers. Their advantage over flued boilers with a single large flue is that the many small tubes

lexie@zozen.com > Get A Quote >

high pressure steam boiler diagram - Boiler Suppli

Sizing a Steam Boiler … 85% of low pressure failures 55% of high pressure failures 34 . Boilers – BetterBricks boilers used in HVAC applications are low-pressure boilers. High-pressure boilers are constructed to operate above the limits set for low-pressure boilers, … Boiler Pressure Parts – Babcock & Wilcox Boiler Pressure Parts. …

lexie@zozen.com > Get A Quote >